140 Alternator installation pics added

I got tired of the 6 volt system on my 140 [ as it is a working tractor and not a trailer queen ] I took a generator bracket off of a super A and mounted it in place of the generator bracket on the 140. Then took a piece of flat steel and made a bracket to fit the alternator. I welded this to the bracket off the super A. It made for a nice bracket for the alternator.
I will take some pics and add tomorrow.
David


works nice out of the way

I will get pictures of my conversion it is almost the same as yours but a different bottom bracket

Here is a pic I will get a closer shot tom.

Dave
What kind on air compressor is that?

Dave
What kind on air compressor is that?

Its a farm Hand from TSC it is a 3 cylinder I like it
David

That alternator looks familiar

That alternator looks familiar

It should

This is how I mounted alternators on my 140's. I used 3 wire set up vs a 1 wire so it charges at lower rpm's.



[/img]http://img173.imagevenue.com/img.php?loc=loc595&image=46854_DSC00028_122_595lo.JPG

[/code]

Try again;

NawlensGator
I got your pictures working again,

Last edited by spaceghost on Mon Mar 10, 2008 5:43 pm, edited 4 times in total.

here is the bracket I made for the 100

NawlensGator photes are working now.