The side panels should each have a "LO-BOY" emblem, as you can see in this picture of Paul Bell's tractor. The 2 small holes on each side above the "INTERNATIONAL CUB" emblem were not used.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
International Cub stainless logo
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- Albie
- Cub Pro
- Posts: 72
- Joined: Thu May 29, 2003 8:39 am
- Location: Pennsylvania
Re: International Cub stainless logo
Tom Evans wrote:I'm in need of the stainless gas tank logo "International Cub" for my 1957 cub lowboy. I have one good side, but the other side is missing the "Int" letters. I might be able to repair it if someone has a damaged logo with a good "Int" portion. (Someone cut a hole in the gastank to access the generator, so I'm looking for a gas tank too) The stainless logo is approx. 16" long X 1" high.
JUST MIGHT HAVE WHAT YOU WANT I WILL CHECK TOMORROW. AlBie
-
- 10+ Years
- Posts: 83
- Joined: Sat Nov 22, 2003 8:29 am
- Location: Iowa
- Tim-Devery
- 10+ Years
- Posts: 56
- Joined: Thu Apr 22, 2004 1:05 pm
- Location: Quakertown PA
-
- 10+ Years
- Posts: 137
- Joined: Fri Jul 02, 2004 7:12 pm
- Zip Code: 49032
- Location: Centreville, MI. 49032
Side radiator logos for Lo-Boys
Tdevery,
On the sides of the Lo-boys by the raiator are stainless logos:
L
O
_
B
O
Y
If you look at the "Photo Gallery" on the Home page, under Farmall Cub Lo-Boy, the one to the right is Paul Bell's Lo-Boy . It shows where & what they are. I believe that Steiners (a link in this e-mail replys) sells them. However, I have two holes above my "International Cub" logo that I suspect may have been where a "McCormick" logo may have went on some models. Good Luck.
On the sides of the Lo-boys by the raiator are stainless logos:
L
O
_
B
O
Y
If you look at the "Photo Gallery" on the Home page, under Farmall Cub Lo-Boy, the one to the right is Paul Bell's Lo-Boy . It shows where & what they are. I believe that Steiners (a link in this e-mail replys) sells them. However, I have two holes above my "International Cub" logo that I suspect may have been where a "McCormick" logo may have went on some models. Good Luck.
- Albie
- Cub Pro
- Posts: 72
- Joined: Thu May 29, 2003 8:39 am
- Location: Pennsylvania
Re: Still no luck on International Cub logo.
Tom Evans wrote:I've checked with JP Tractor, TM Tractors, Grand Blanc, and Valu-Bilt with no success. Still looking, Thanks.
I just polished a set of INTERNAL CUB 16 inch long. Can send you a picture if you are interested before I go to E bay. Hope to get them on e bay tomorrow. AlBie
-
- 10+ Years
- Posts: 137
- Joined: Fri Jul 02, 2004 7:12 pm
- Zip Code: 49032
- Location: Centreville, MI. 49032
AlBie, International Cub Logo
AlBie,
Yes I'm very intrested. Do you have a buy me now price in mind? Please contact me at ChrisTomEvans@hotmail.com. If not, how will they be listed on e-bay?
Thanks again,
Tom Evans
Yes I'm very intrested. Do you have a buy me now price in mind? Please contact me at ChrisTomEvans@hotmail.com. If not, how will they be listed on e-bay?
Thanks again,
Tom Evans
-
- 10+ Years
- Posts: 7
- Joined: Sat Mar 13, 2004 11:32 am
- Location: Al. Deatsville
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Who is online
Users browsing this forum: No registered users and 55 guests