I see a lot of posts on throw out bearings not being greased properly well I got to ask were is this bearing located so I can grease it??
thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
throw out bearing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 273
- Joined: Sun Aug 12, 2007 5:21 pm
- Zip Code: 00000
- Location: OH,
-
- 10+ Years
- Posts: 6547
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
Re: throw out bearing
mth74 wrote:I see a lot of posts on throw out bearings not being greased properly well I got to ask were is this bearing located so I can grease it?? thanks
I got the same question. Sounds like something that we should have demonstrated at DOCFEST, and i got a few tractors that we can demonstrate on......
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
-
- 10+ Years
- Posts: 1841
- Joined: Sat Nov 06, 2004 2:28 pm
- Zip Code: 43130
- eBay ID: evilboweviel
- Location: OH, Lancaster
-
- 10+ Years
- Posts: 1573
- Joined: Sun Feb 02, 2003 11:01 pm
- Zip Code: 36310
- Tractors Owned: 1975 IH cub,1948 farmall cub,1979 international 3200 skid steer and a 1974 John deere 350B dozer.
- Location: Abbeville Alabama
the bearing is located in the bell housing just behind the engine. If its the original graphite bearing it does have a grease zert but its hopeless to get grease to go in so the best thing is to open the access cover on the bottom to the bell husing then take a long putty knife with a good dab of dreas on it, reach up with the putty knife and dab some grease on the bearing face.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
-
- 10+ Years
- Posts: 3032
- Joined: Thu Nov 15, 2007 10:39 am
- Zip Code: 62253
- Circle of Safety: Y
- Location: IL, Greenville
Mine always takes grease just fine. I had to learn the hard way that it needs to be greased. My onlt question is where is the weep hole for the grease to come out and let you know it is full?
1947 Circle Cub, 193, 189
1954 Cub w/FH, IH100, 194, F11
1956 Cub Loboy w/FH and 194
1960 Cub Loboy w/FH and L-54
1953 Super A, 2 seater B, Avery V, Avery A, JD M, MH Pony, Leader D, Allis Chalmers C, and my Great Grandpa's ZA Minneapolis Moline.
1954 Cub w/FH, IH100, 194, F11
1956 Cub Loboy w/FH and 194
1960 Cub Loboy w/FH and L-54
1953 Super A, 2 seater B, Avery V, Avery A, JD M, MH Pony, Leader D, Allis Chalmers C, and my Great Grandpa's ZA Minneapolis Moline.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
The weep hole is opposite the grease fitting. So it's on top in the bellhousing.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14
- 373
-
by Glen
Tue May 03, 2022 8:25 pm
-
-
Offset throw-out bearing Attachment(s)
by AndrewSpencer » Mon Aug 01, 2022 12:22 pm » in Farmall Cub - 7
- 428
-
by AndrewSpencer
Wed Aug 03, 2022 12:18 pm
-
-
- 4
- 215
-
by tst
Tue Oct 04, 2022 5:46 pm
-
- 1
- 178
-
by Dale Finch
Wed Jun 02, 2021 8:27 pm
-
-
Differential bearing change out Attachment(s)
by jrogers885 » Fri May 26, 2023 7:05 am » in Farmall Cub - 11
- 376
-
by tst
Tue Jun 06, 2023 11:31 pm
-
Who is online
Users browsing this forum: No registered users and 3 guests