H Radiator bolts.

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

H Radiator bolts.

Postby SONNY » Thu Apr 10, 2008 11:07 pm

How are the bottom bolts that hold the radiator on the H put in the rad.?---they look "made in" and both of them broke/rusted off and I have to replace the front end, so rad. and steering shaft has to come out of the other tractor. They have springs and rubber wads under the them too!---Once broken off, there is no way to hold the radiator down, and it would vibrate a hole in the bottom tank in no time! thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2242
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: H Radiator bolts.

Postby RustyFarmall » Fri Apr 11, 2008 9:48 am

Those fasteners are studs. Half of the stud is threaded into the radiator, and the other half extends down through the mounting holes. If those studs are rusted away, or broken off, you will need to get whatever is left of them out of the radiator, and then install new studs. Normally I find the best way to rmove a broken stud is to weld a nut to the broken stud, and then just use a wrench and turn it out. In this case though, since the broken studs are in a radiator, I am afraid that the heat from the welding might damage the radiator. The only other way is to drill them out.
RustyFarmall
5+ Years
5+ Years
 
Posts: 173
Joined: Fri Nov 16, 2007 4:14 pm
Location: New Market, Iowa
Zip Code: 51646

Re: H Radiator bolts.

Postby SONNY » Fri Apr 11, 2008 12:02 pm

Thats kinda what I was afraid of!!-----guess I didn't want to use the H anymore anyway!---At least it has a front end that will steer, --just no radiator! ---- thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2242
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: H Radiator bolts.

Postby RustyFarmall » Fri Apr 11, 2008 1:05 pm

New radiators are available, although they are a bit pricey, and of course there are some very good used radiators out there if you look. Another option is to take the radiator to a repair shop and see if they can get those studs out. Probably wouldn't cost all that much. It would be a shame to let a good 'ol H just waste away for lack of a radiator.
RustyFarmall
5+ Years
5+ Years
 
Posts: 173
Joined: Fri Nov 16, 2007 4:14 pm
Location: New Market, Iowa
Zip Code: 51646

Re: H Radiator bolts.

Postby SONNY » Fri Apr 11, 2008 3:41 pm

At this point the $$$ just isn't here for any other repairs, so looks like it will have to take up shed space like all the other units that I have that need fixing!
Our garden comes first, and I really would like to do some more work on my creeper for the garden! thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2242
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: H Radiator bolts.

Postby schmibm » Mon Apr 28, 2008 8:53 pm

I would try welding the nut on. Just be careful with the heat. It will work.
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
20 other Farmalls A thru SMTA.
User avatar
schmibm
5+ Years
5+ Years
 
Posts: 587
Joined: Tue Jun 06, 2006 10:37 pm
Location: Janesville, IA

Re: H Radiator bolts.

Postby SONNY » Wed Apr 30, 2008 8:46 pm

The studs are broke off about 2 threads down into the rad itself, and I am afraid heat that close would do some unsoldering !----drilling them out would be "iffy", but still need to try something! thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2242
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: H Radiator bolts.

Postby schmibm » Fri May 02, 2008 3:36 pm

Gotta try something. If all else fails, take it to a rad shop and see what they can do.
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
20 other Farmalls A thru SMTA.
User avatar
schmibm
5+ Years
5+ Years
 
Posts: 587
Joined: Tue Jun 06, 2006 10:37 pm
Location: Janesville, IA


Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 0 guests