This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New guy 154 wont lift
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 140
- Joined: Mon Apr 21, 2008 8:02 pm
New guy 154 wont lift
Just trying this out to see if I am in the system. I have been restoring a 154 for a couple of years. I am having trouble with the lift. It will come up slowly but wont hold up any weight. I have replaced the filter and the fluid is good. The last thing was to disassemble the spool valve and look at the overload valve. It seemed OK and the mechanic at the dealer thought that it looked good. I have replaced all the o-rings so I am going to try that out. any ideas would be greatly appreciated.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: New guy 154 wont lift
GT:
There is not a lot of info on the Numbered Cubs on the server, but the 154 is covered. Have a look.. it might help. Still looking for more Numbered Cub stuff..
Welcome to the forum family btw..
Rudi wrote: to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server where you will find a bunch of really useful links.
There is not a lot of info on the Numbered Cubs on the server, but the 154 is covered. Have a look.. it might help. Still looking for more Numbered Cub stuff..
Welcome to the forum family btw..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: New guy 154 wont lift
Is the tranny full of hytran? (hydraulic oil)
Do you have a 3pt hitch plus the mid rocker shaft plus a selector too? (two hydraulic cylinders)Do you have the hoses right on the selector?
Now do you have oil flow from the pump? You need to check that out. Did you rebuild the hydraulic pump? Since the oil level is below the pump i would try priming the pump too. I'm not sure but i've seen dry pumps in other applications not suck the oil up. Just squirt some oil in the pump.
Do you have a 3pt hitch plus the mid rocker shaft plus a selector too? (two hydraulic cylinders)Do you have the hoses right on the selector?
Now do you have oil flow from the pump? You need to check that out. Did you rebuild the hydraulic pump? Since the oil level is below the pump i would try priming the pump too. I'm not sure but i've seen dry pumps in other applications not suck the oil up. Just squirt some oil in the pump.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: New guy 154 wont lift
Look for a leaking/damaged seal on the piston in one of the hydraulic cylinders. I am not familiar with the 154 hydraulic set up. However, from your description the problem is quite common for leaking/damaged seal letting the hydraulic fluid bypass the hydraulic cylinder's piston.
If you have two or more cylinders you need to obtain plugs matching the hydraulic hose ends and block off one cylinder at a time. Block off one cylinder then operate the hydraulics. If the symptom persists. Reconnect the first cylinder then block off the hoses to the second cylinder and operate the system.
If you have two or more cylinders you need to obtain plugs matching the hydraulic hose ends and block off one cylinder at a time. Block off one cylinder then operate the hydraulics. If the symptom persists. Reconnect the first cylinder then block off the hoses to the second cylinder and operate the system.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: New guy 154 wont lift
mine wont go up or down , when i first rehabbed it and got it up an runnin i raised the deck and now all it does is kinda squeel ,i dont know what to think it has fluid when i opened the plug on the back of the trannie it was very bubbly .
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: New guy 154 wont lift
Check the fluid level in the reservoir. Refill then work the system up and down. Check the fluid level, refill, work the system, refill. Bubbles in hydraulic fluid = low fluid level or sucking air.mine wont go up or down , when i first rehabbed it and got it up an runnin i raised the deck and now all it does is kinda squeel ,i dont know what to think it has fluid when i opened the plug on the back of the trannie it was very bubbly .
I have an excuse. CRS.
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: New guy 154 wont lift
i must be sucking air then , because the resivoir seams full ,when i remove the plug on the rear end by the pto it will start to flow out but real bubbly and a lil dirty lookin .
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 13 guests