This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
STUD
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
STUD
I want to remove the round inspection plate to set the timing. The wing nut stud is bent over 90 deg. My question is can the stud be replaced after it breaks off as I'm sure it will?
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- Virginia Mike
- 10+ Years
- Posts: 1300
- Joined: Tue Nov 23, 2004 7:21 pm
- Zip Code: 24095
- Tractors Owned: '49 Cub
'49 JD "B"
'79 JD 2040
'50 DB "Garden Tractor"
'52 DB "Super Power"
'56 DB "Big 5"
'62 DB "Super 600"
'37 McCormick Deering "LA" engine - Location: Stewartsville, Virginia
Re: STUD
I assume the is on the new "A". If you wiggle carefully with some Kroil, it may screw out. The stud that is.
Best,
Mike
Best,
Mike
Best,
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: STUD
Making the same assumption, the stud is welded to the crossbar. Once you take the wing nut off, the whole bar/stud part comes out. It is the same as the Cub (literally the same part number).
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: STUD
The cross bar did not come out without a fight. It was packed tightly in grease and everything you would find in a squirrel nest including the acorns. Wonder how it got in there.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 4 guests