Bench Grinders

Have a safety tip you want to share? Did you or a friend learn it the hard way? Help someone else by posting your tips on tractor, farm, shop, lawn, garden, kitchen, etc., safety.

Moderator: Team Cub

Forum rules
Safety is an important and often overlooked topic. Make safety a part of your everyday life and let others know how much you care by making their lives safer too. Let the next generation of tractor enthusiasts benefit from your experience, and maybe save a life or appendages.

Bench Grinders

Postby Ralph » Thu May 08, 2008 9:15 pm

CAUTION...................
With these grinders they have their own set of Dangers inolved.
Some of them include
the posibility of the wheel shatering under the high rotation.
not having the tool Rest set close enough to the wheel or tightened properly.
Not having the guard in place
gloves and sleeves snug so as to not get cought in the wheel.
Keep a container of water close to the grinder to cool the part.
keep flamables at a distance.

This is a short list there is several more
So lets hear it :roll:
Shoot low Sherriff they are Riding Shadows
4 Wheels move the body.....
2 Wheels move the Soul .....

Shop Phone 859-283-2668
Ralph in ky.
User avatar
Ralph
Cub Pro
Cub Pro
 
Posts: 2665
Joined: Sun Feb 02, 2003 7:01 pm
Location: Ky Florence Y'ALL
Zip Code: 41005
Tractors Owned: Near 200 cubs through the years
Circle of Safety Award
Circle of Safety: Y

Re: Bench Grinders

Postby Don McCombs » Thu May 08, 2008 9:22 pm

Always, always, always wear gloves and eye protection when using a grinder or wire wheel.
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10372
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Bench Grinders

Postby Redman » Thu May 08, 2008 9:39 pm

:?:
Last edited by Redman on Mon Jun 14, 2010 8:35 pm, edited 1 time in total.
Redman
501 Club
501 Club
 
Posts: 609
Joined: Mon May 08, 2006 3:15 pm
Zip Code: 00000

Re: Bench Grinders

Postby Don McCombs » Fri May 09, 2008 6:30 am

Good point, Rick. I use tight fitting gloves for that purpose. A wire wheel brushburn can be very painful.
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10372
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Bench Grinders

Postby Dennis » Fri May 09, 2008 2:25 pm

All excellent points! I've used bare hands when grinding on a mower blade and was reminded real quick how hot that metal can get on a grinder, so on went the gloves... not thinking about the snag factor. Maybe as Don pointed out, I should get a tighter fitting pair :?:
User avatar
Dennis
Site Admin
 
Posts: 2461
Joined: Sat Feb 01, 2003 9:53 pm
Location: MO, Oak Grove
Zip Code: 64075
Tractors Owned: 1947 Farmall Cub
104 Cub Cadet
Cub Cadet Original
Circle of Safety Award
Circle of Safety: Y
Twitter ID: @farmallcubcom

Re: Bench Grinders

Postby George Willer » Fri May 09, 2008 3:02 pm

Gloves can be an even bigger hazzard around a drill press. :(
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Re: Bench Grinders

Postby Jim Roy » Fri May 09, 2008 5:49 pm

Great points in fact I thank the safety topic is very important thanks Dennis. :) :)
Jim
Image
My wife has a long honey do list, I read it, thank about it, than take a nap to see if it goes away.
49 Cub

Image
User avatar
Jim Roy
501 Club
501 Club
 
Posts: 637
Joined: Sat Mar 10, 2007 9:43 am
Location: Kentucky-Windsor

Re: Bench Grinders

Postby Dan England » Fri May 09, 2008 8:07 pm

A. Don't store items near the grinder, keep the work area clean. B. Use vice-grips to hold small items when using the wire wheel to remove rust. Recently I was holding small bolts by hand while cleaning them. The wheel jerked a bolt from my grip and sent it flying into a can of spray paint sitting nearby. The bolt punctured the can and a stream of paint hit my face. My glasses kept paint from my eyes and a mask protected my mouth and nose. But each cheek received a liberal amount of paint. Item A: I carelessly left spray can of paint sitting by the grinder. B. Vice-grips, if used, would have held the bolt securely and the accident would not have happened.
Dan England
501 Club
501 Club
 
Posts: 3094
Joined: Sun Feb 02, 2003 8:37 pm
Location: AR, Waldo
Zip Code: 71770
Skype Name: danengland1

Re: Bench Grinders

Postby George Willer » Fri May 09, 2008 8:24 pm

Dan England wrote:A. Don't store items near the grinder, keep the work area clean. B. Use vice-grips to hold small items when using the wire wheel to remove rust. Recently I was holding small bolts by hand while cleaning them. The wheel jerked a bolt from my grip and sent it flying into a can of spray paint sitting nearby. The bolt punctured the can and a stream of paint hit my face. My glasses kept paint from my eyes and a mask protected my mouth and nose. But each cheek received a liberal amount of paint. Item A: I carelessly left spray can of paint sitting by the grinder. B. Vice-grips, if used, would have held the bolt securely and the accident would not have happened.


Dan,

That reminds me of an accident I had years ago. I didn't think I could get it cleaned up very well so I applied an old Willer rule. "Always make it look like you did it on purpose." :D

Image
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Re: Bench Grinders

Postby Arizona Mike » Sun May 11, 2008 2:04 pm

:big smile:


Ace Hardware sells a glove called Nyplex. Its an easy to get on "medical style" glove and its not that uncomforable to wear. A large box (8.95) lasts me a year. Also eases the pain of arthric hands.
"The time you spend making sure you are safe is probably the most productive time you can spend!"
George Willer



Image
User avatar
Arizona Mike
Cub Pro
Cub Pro
 
Posts: 1934
Joined: Tue Mar 11, 2003 9:16 pm
Location: way high up in the Huachuca Mt. at the bottom of a deep dark canyon
Zip Code: 85615
Tractors Owned: 6 Cubs and no mas.

1947 Circle series Farmall Cub with Armstrong lift, belt pulley, 5"rims 6" tires, SN 563

1949 Farmall Cub with high crop option and hydraulics

1955 Farmall Cub with fast hitch

1955 International Cub Loboy with fast hitch

1957 Farmall Cub with fast hitch

1959 Farmall Cub with fast hitch

Re: Bench Grinders

Postby Arizona Mike » Sun May 11, 2008 2:05 pm

:big smile:


Ace Hardware sells a glove called Nyplex. Its an easy to get on "medical style" glove and its not that uncomforable to wear. A large box (8.95) lasts me a year. Also eases the pain of arthric hands.
"The time you spend making sure you are safe is probably the most productive time you can spend!"
George Willer



Image
User avatar
Arizona Mike
Cub Pro
Cub Pro
 
Posts: 1934
Joined: Tue Mar 11, 2003 9:16 pm
Location: way high up in the Huachuca Mt. at the bottom of a deep dark canyon
Zip Code: 85615
Tractors Owned: 6 Cubs and no mas.

1947 Circle series Farmall Cub with Armstrong lift, belt pulley, 5"rims 6" tires, SN 563

1949 Farmall Cub with high crop option and hydraulics

1955 Farmall Cub with fast hitch

1955 International Cub Loboy with fast hitch

1957 Farmall Cub with fast hitch

1959 Farmall Cub with fast hitch

Re: Bench Grinders

Postby Fl Cubman » Sun May 11, 2008 3:29 pm

Happy Mother's Day to all cubbers and their wives.

To add to the good post for bench grinders:

Do not use outside where water can stand in the guard and the wheel stand in water. This causes a unbalance condition
and the wheel will explode.

When starting up stand to the side until it has reached operating speed. STAY out of Line of Fire.

Do not let a wheel get loaded up or use wrong wheel for metal used.

Keep a flat faced wheel at all times.

O. C.
Fl Cubman
 
Posts: 10
Joined: Tue Mar 18, 2008 3:14 pm
Location: Fl Cantonment - North of Pensacola
Zip Code: 32533
Tractors Owned: Farmall Cub 1951
Farmall Cub 1975
Massey Ferguson 240 1991


Return to Safety Forum

Who is online

Users browsing this forum: No registered users and 1 guest