This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
low pressure
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 140
- Joined: Mon Apr 21, 2008 8:02 pm
low pressure
Okay where can I get a gauge to check the hydraulic pressure on a 154. I have fixed part of my problem by replaceing the control valve with one from Bates inc. I can control the up and down and the belly cylinder doesent creep out any more but Now the lift will only go up with the motor wound up all the way!! and the 3 point will colapse a couple of inches when I put my weight on it. somebody help me please. If I don't get this thing going my bride is going to run me off.
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: low pressure
Hardware store in the plumbing section. Look for a guage that reads at least 1500 lbs psi. Guages come in a number of thread sizes - so take the plug with you when you pick up a guage. They are not very expensive -- Last one with 1/4" pipe threads cost me just under $13-.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 140
- Joined: Mon Apr 21, 2008 8:02 pm
Re: low pressure
Problem solved I repaced the pump. I bought one on e-bay a few weeks ago cause I could buy it right. But anyway I still don't know why the other pump don't work.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 15 guests