This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
carb kit needed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- vanceboroguy
- 10+ Years
- Posts: 239
- Joined: Mon Jan 14, 2008 8:07 am
- Zip Code: 28586
- Tractors Owned: 51 F CUb
- Location: N.C.,Vanceboro
carb kit needed
I need to rebuild carb on my Super A. It has B21 cast in body of carb. It is a Zenith carb. Where might I find proper kit for this old carb? Thanks Randy Bryan
- Don McCombs
- Team Cub Mentor
- Posts: 17442
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: carb kit needed
Randy,
Try here:
http://www.thecarburetorstore.com/
or here:
http://www.farmersservice.com/newzenith.htm
You may have to call them to get the correct kit. Let us know how you make out.
Try here:
http://www.thecarburetorstore.com/
or here:
http://www.farmersservice.com/newzenith.htm
You may have to call them to get the correct kit. Let us know how you make out.
Last edited by Don McCombs on Sat Jun 14, 2008 3:33 pm, edited 2 times in total.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: carb kit needed
Randy - call Ken Updike at Carter & Gruenewald. Their number is listed on their website @ http://www.cngco.com
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Re: carb kit needed
While the genuine IH kit is the only way to go on a Cub carb, I was disappointed with the IH kit for a Zenith on a 100. I would go to NAPA, I used their kit on my Super A an it worked well. It does not include the throttle shaft, so if you need that, it will have to came from Case/IH. You need the number off the round brass tag on the top of the carburetor to be sure you get the correct kit. I believe the NAPA number is CRB 21565 for most IH Zenith carbs used on the Super A.
The four most expensive words in tractor restoration: "We might as well..."
- vanceboroguy
- 10+ Years
- Posts: 239
- Joined: Mon Jan 14, 2008 8:07 am
- Zip Code: 28586
- Tractors Owned: 51 F CUb
- Location: N.C.,Vanceboro
Re: carb kit needed
Thanks, I will try NAPA since it is one close to home. Randy
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 7 guests