This has been in my family for 3 generations. I heard my brother in-law had the cylinders bored out, for sure, new pistons and rings, I think. He also painted the hood. As far as I know everything else is original. My sister has used it weekly around her house and then it has set for a year or two. It's mine for keeps and I want to treat it right. I did see a post with steps for new owners of old cubs and I'm ready. I'm also very interested in trying electrolysis on the floor/platform, rear fenders, radiator bracket and other parts. It does have a 5 ft side sickle for cutting grass. Adjustable plow in front. Garden plow to pull. Saw mill set up along with the belt, pulley's and large circular saw blade. The only thing I've done so far was to drain gallon of old gas, clean sediment bowl and flush with fresh grass through bottom plug in carburetor. I cranked the hand crank and it squeak but that stopped after full turn and I continued cranking 5 - 6 times. It started running the second I pulled the starter. That's how I got it on the trailer and then into my garage. Well I did take it for a ride but not long. I hope to rely on this board's passed post and any help I may receive. I do have pictures at http://s220.photobucket.com/albums/dd29 ... s/Tractor/ Howdy folks.