Hello,
I have been getting my cub prep'd for paint ,after removing the fuel tank I noticed my wire harness is pretty much deteriorated ,I have a Jensales manual but it's pretty generic, could someone possible post the correct diagram please? my sn# is 96,XXX ,It has three light's, a four position switch for charging and light's ,ampmeter ,none of which worked I am going to keep it as original as possible 6v.
Any help would be much appreciated. Thank You.
[/url]
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
'49 Cub Wiring Diagram
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- k. hansen'49cub
- 10+ Years
- Posts: 39
- Joined: Sun Sep 21, 2003 8:02 pm
- Location: New Jersey
'49 Cub Wiring Diagram
Keith
'39JD B
'49 cub
'52 8n
'53 Golden Jubilee
And a whole bunch of Cub Cadets.....
'39JD B
'49 cub
'52 8n
'53 Golden Jubilee
And a whole bunch of Cub Cadets.....
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- k. hansen'49cub
- 10+ Years
- Posts: 39
- Joined: Sun Sep 21, 2003 8:02 pm
- Location: New Jersey
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
I learned the very hard way that the manual(s) are INVALUABLE!
I could not locate the correct diagram on Rudi's server and spent HOURS tracing down the wires (wringing them out I think is the correct term) and it was all clearly laid out in the OPERATORS MANUAL.
Well worth the $10!
The service and parts manuals are more money (27 + 23 each I think)
I also ordered the wiring harness. Not sure if it is worth $50 but the colors all match up and it seems to be a quality part.
Got them pretty quick from Carter and Gruenwald.
My tractor looks like yours, parts everywhere!
Good Luck
I could not locate the correct diagram on Rudi's server and spent HOURS tracing down the wires (wringing them out I think is the correct term) and it was all clearly laid out in the OPERATORS MANUAL.
Well worth the $10!
The service and parts manuals are more money (27 + 23 each I think)
I also ordered the wiring harness. Not sure if it is worth $50 but the colors all match up and it seems to be a quality part.
Got them pretty quick from Carter and Gruenwald.
My tractor looks like yours, parts everywhere!
Good Luck
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
- k. hansen'49cub
- 10+ Years
- Posts: 39
- Joined: Sun Sep 21, 2003 8:02 pm
- Location: New Jersey
Thank You for the offer, I am going to tackle this tonight, I would like to get it painted before the end of the mowing season (my Cub Cadet's are getting quite the work out!) I was in R.I. last week,I try to get to Quonset Air museum for the military vehicle show ,it's a nice stop on the way to vacation ,I am going to check Carter & Gruenwald's web sight ,Thank's for the tip!
Keith
'39JD B
'49 cub
'52 8n
'53 Golden Jubilee
And a whole bunch of Cub Cadets.....
'39JD B
'49 cub
'52 8n
'53 Golden Jubilee
And a whole bunch of Cub Cadets.....
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Keith,
I went to that show last year. Pretty interesting. Mostly I was interested because I just bought an M105A2 trailer down at Groton and was about to pick it up when I saw the signs for the show.
Pounds for dollars it was a sweet deal.. 2600# empty and I paid $200 for it. Had to modify it so I could use 2" ball and drop the hitch so I could attach it 'level' to the F250 (receiver stuck but good). Something like 18 leaf springs each side.
Let me know if I can decipher the wiring for ya.
I went to that show last year. Pretty interesting. Mostly I was interested because I just bought an M105A2 trailer down at Groton and was about to pick it up when I saw the signs for the show.
Pounds for dollars it was a sweet deal.. 2600# empty and I paid $200 for it. Had to modify it so I could use 2" ball and drop the hitch so I could attach it 'level' to the F250 (receiver stuck but good). Something like 18 leaf springs each side.
Let me know if I can decipher the wiring for ya.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
Who is online
Users browsing this forum: Glen and 4 guests