Update on George Willer as of: 10/16/08
Moderator: Team Cub
43 posts
• Page 3 of 3 • 1, 2, 3
Re: Update on George Willer as of: 10/16/08
by Don McCombs » Thu Oct 16, 2008 10:42 am
On the way.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9488
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH 
- Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by Hengy » Thu Oct 16, 2008 10:46 am
Bigdog... where was he operated on? (what City?) George mentioned traveling for the surgery. This has to really stink for all involved if they have to stay "away from home" during this time...
Mike in La Crosse, WI
Mike in La Crosse, WI
Mike in Gibsonia, PA
-
Hengy - Cub Pro
- Posts: 6616
- Joined: Sat Feb 18, 2006 8:12 pm
- Location: PA, Gibsonia
- Zip Code: 15044
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by Bigdog » Thu Oct 16, 2008 10:49 am
Cleveland - Mike.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by Hengy » Thu Oct 16, 2008 11:06 am
Bigdog wrote:Cleveland - Mike.
WOW... that IS a long way to be away from home after Surgery!! Do they have family in the area that Marilyn can stay with?
Mike in La Crosse, WI
Mike in Gibsonia, PA
-
Hengy - Cub Pro
- Posts: 6616
- Joined: Sat Feb 18, 2006 8:12 pm
- Location: PA, Gibsonia
- Zip Code: 15044
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by Bill Hudson » Thu Oct 16, 2008 11:09 am
Prayer has been lifted up.
Bill
Bill
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
- Bill Hudson
- TeamCubGuide
- Posts: 5571
- Joined: Wed Jul 26, 2006 10:50 am
- Location: OH, Madison
- Zip Code: 44057
- Tractors Owned: :
57 F-Cub
64 Lo-Boy
68 Lo-Boy
52 F-Cub - Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by wild bill » Thu Oct 16, 2008 11:19 am
i use will . never met him but he must be a nice man .
bill
- wild bill
- Cub Star
- Posts: 51
- Joined: Tue Aug 12, 2008 4:34 pm
- Location: GA. Good Hope
-
John(videodoc) - 501 Club
- Posts: 6342
- Joined: Mon Jul 25, 2005 10:16 pm
- Location: IL, Paris just off of Interstate 70
- Zip Code: 61944
- Tractors Owned: -
55 FCub
1950 Demo "Bette"(Done)22 mower
1950 Demo "Roxie"(Done)144 Complete Cult's
1950 Demo "Louise"(Done) IH 1000 One arm Loader
1950 Demo"Sandy"(Done) 193 Plow
1950 Demo "Dana"(Next)
1950 Demo "Billie" -(Woods 59")
Buzz saw
Corn Stalk Cutter
23a Disc
Mid Mount Grader Blade
&
2005 Mahindra w/FEL - Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by Corky's Cub » Thu Oct 16, 2008 1:58 pm
Prayers from Georgia on the way...
I found this old Cub, Forgotten and Forlorn,
With pistons and valves frozen and worn.
Help from my buddies on Farmallcub.com,
And an engine from Ralph, (37’s the one),
Now ole Corky is running and back to life,
Much to the surprise of my dear, dear wife!
With pistons and valves frozen and worn.
Help from my buddies on Farmallcub.com,
And an engine from Ralph, (37’s the one),
Now ole Corky is running and back to life,
Much to the surprise of my dear, dear wife!
-
Corky's Cub - 501 Club
- Posts: 2447
- Joined: Thu Mar 08, 2007 12:57 pm
- Location: Georgia, Jackson County
- Zip Code: 30607
- Tractors Owned: Just Two:
1957 Farmall Cub
"Corky"s Cub
1960 Cub LoBoy
'Mr Harold" in honor of
Kodiak's Dad!
Re: Update on George Willer as of: 10/16/08
by Into Tractors » Thu Oct 16, 2008 2:07 pm
Thanks for the update, been thinking about GW all week now, hope things turn for the better now.
Mike Duncan
-
Into Tractors - 501 Club
- Posts: 1589
- Joined: Sat Jun 03, 2006 8:09 am
- Location: Yellow Springs, Ohio
- Zip Code: 45387
Re: Update on George Willer as of: 10/16/08
by Dennis » Thu Oct 16, 2008 3:16 pm
Bless you George and Marilyn. Hurry up and get well George, we all miss you.
-
Dennis - Site Admin
- Posts: 1959
- Joined: Sat Feb 01, 2003 9:53 pm
- Location: MO, Oak Grove
- Zip Code: 64075
- Tractors Owned: 1947 Farmall Cub
104 Cub Cadet
Cub Cadet Original - Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by Barnyard » Thu Oct 16, 2008 3:52 pm
Many of the regulars from over the years know George very well. If you have joined the forum in the past year chances are you never had the pleasure to meet George. I attended his Winter CubFest in January and it was the one time I got to meet him. He and I have exchanged PM’s several times also. He has been somewhat of an inspiration to me in that he would give me a little advice now and then.
When I talked with him at his CubFest I had just picked up #12 and had it out on the trailer. He said that at the rate I was going I would surpass him with the number of Cubs owned shortly unless I slowed down. This summer I picked up #18 which had gone through a fire. Rosanne and I were discussing a name for it when I looked at the burned metal on it and thought of one of my favorite comedians – George Burns. I also thought of my new friend, George Willer, another man with a sense of humor and how I thought that maybe now I had finally surpassed him in the Cub count. George is a natural name for this Cub. George Willer would take something that looks like this Cub and make it a thing of beauty. I hope I can too.
George is an unbelievable guy. He is always willing to help a fellow Cubber. He is always thinking of a better way to make a repair and he makes sure to share his thoughts with others. He is a friend to all that visit this forum. For those of you who have not had the opportunity to enjoy George’s company check out his website at http://www.gwill.net. It is an excellent way to learn more about a very gifted gentleman.
As always, Rosie and I send our prayers to George and Marilyn. We hope everything works out for the good and we hope to visit again in the future.
When I talked with him at his CubFest I had just picked up #12 and had it out on the trailer. He said that at the rate I was going I would surpass him with the number of Cubs owned shortly unless I slowed down. This summer I picked up #18 which had gone through a fire. Rosanne and I were discussing a name for it when I looked at the burned metal on it and thought of one of my favorite comedians – George Burns. I also thought of my new friend, George Willer, another man with a sense of humor and how I thought that maybe now I had finally surpassed him in the Cub count. George is a natural name for this Cub. George Willer would take something that looks like this Cub and make it a thing of beauty. I hope I can too.
George is an unbelievable guy. He is always willing to help a fellow Cubber. He is always thinking of a better way to make a repair and he makes sure to share his thoughts with others. He is a friend to all that visit this forum. For those of you who have not had the opportunity to enjoy George’s company check out his website at http://www.gwill.net. It is an excellent way to learn more about a very gifted gentleman.
As always, Rosie and I send our prayers to George and Marilyn. We hope everything works out for the good and we hope to visit again in the future.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15740
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: Update on George Willer as of: 10/16/08
by deputy jailer » Fri Oct 17, 2008 9:01 am
Prayers continue to go out 
- deputy jailer
Re: Update on George Willer as of: 10/16/08
by beaconlight » Fri Oct 17, 2008 9:17 am
God bless George and Marilyn.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
beaconlight - Cub Pro
- Posts: 7673
- Joined: Thu Aug 19, 2004 2:31 pm
- Location: NY Staten Island & Franklin
- Zip Code: 10314
43 posts
• Page 3 of 3 • 1, 2, 3
Return to Sharing with Friends and Family
Who is online
Users browsing this forum: No registered users and 1 guest
|
|