Hello
I'm wondering what is the easiest way to loosen a frozen rear wheel on a Farmall A?
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall A rear wheel
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall A rear wheel
James, you have to be really observant and careful but this works: Loosen all the lug bolts and back them out about 1/8". Then drive the tractor around making both right and left turns. The sideways thrust should break the wheel free without creating damage to the bolts.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 31
- Joined: Thu Aug 09, 2007 8:16 am
Re: Farmall A rear wheel
Thanks Bigdog
Would this work with a front loader moving the front from side to side. This tractor doesn't run and I need to transport it.The salvage yard I bought it, from attaches chains to the front and tows it .
Would this work with a front loader moving the front from side to side. This tractor doesn't run and I need to transport it.The salvage yard I bought it, from attaches chains to the front and tows it .
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: Farmall A rear wheel
Search up on WEDGES before you take the wheel off, I found that out the hard way..
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall A rear wheel
Since the tractor is not driveable, I'd first try spraying the hub down with penetrant and using a wooden block as a buffer, place it against the wheel and strike it with a sledge hammer. Strike in both directions to break it free. The loose wheel method will work with the tractor being towed.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 31
- Joined: Thu Aug 09, 2007 8:16 am
Re: Farmall A rear wheel
Thanks Jackman and Bigdog
Jackman by wedge are you talking about using after loosening the wheel bolts between the wheel & hub?(I like it) or to keep the tractor from rolling ?
Bigdog I had a suggestion that it could be the brake is stuck to the wheel, should I soak it with PB Blaster and let it sit a few days or would it loosen in a few hours?
Jackman by wedge are you talking about using after loosening the wheel bolts between the wheel & hub?(I like it) or to keep the tractor from rolling ?
Bigdog I had a suggestion that it could be the brake is stuck to the wheel, should I soak it with PB Blaster and let it sit a few days or would it loosen in a few hours?
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Farmall A rear wheel
Wedging. This is a photo of a Cub, but it should work identically for an A.
Photo courtesy G. Willer
Photo courtesy G. Willer
-
- 10+ Years
- Posts: 31
- Joined: Thu Aug 09, 2007 8:16 am
Re: Farmall A rear wheel
Thanks Don
I saw the wedging before I asked the question , I figured since both the front tires were flat and I'm goind to have to replace the wheels I didn't think I needed to stabilize the front but I'll be sure and do that.
I saw the wedging before I asked the question , I figured since both the front tires were flat and I'm goind to have to replace the wheels I didn't think I needed to stabilize the front but I'll be sure and do that.
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Farmall A rear wheel
James, it prevents an offset design tractor from rolling longitudinally about the hinge pin if support is reduced on one rear wheel.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
rear wheel hub bolts
by kenbow56 » Tue Oct 18, 2022 10:09 am » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 144
-
by Jim Becker
Tue Oct 18, 2022 11:18 am
-
-
-
Super A Cast Rear Wheel Center
by PoconoCub » Fri Aug 12, 2022 1:02 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 3
- 193
-
by Jim Becker
Fri Aug 12, 2022 1:43 pm
-
-
-
wheel weights or no wheel weights
by jdeere86 » Tue Feb 21, 2023 3:49 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 9
- 385
-
by ShawnAgne
Fri Mar 03, 2023 10:19 pm
-
-
-
wider wheel/ tire options for 130 with loader
by inairam » Mon Feb 28, 2022 9:38 am » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 204
-
by Jim Becker
Mon Feb 28, 2022 10:47 pm
-
-
-
9.5/9-24 rear tire vs 11.5/24
by EZ » Fri Dec 23, 2022 7:50 am » in Farmall A, Super A, AV, 100, 130 & 140 - 7
- 219
-
by EZ
Sat Dec 24, 2022 9:37 am
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest