BC,
Do you mean just keep siphoning the gas out, or somehow affix a hose to the sediment bowl fixture?
I think it would take more patience than I've got to siphon a gallon in and out a dozen times
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
:( #@$%! Jay is dying on me! #@$%! :(
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Siphon?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Gotcha, thanks!
Gotcha, thanks! I've got a piece of fuel line that should work OK.
I gotta figure out how that screen is supposed to be fit into the top of the sediment bowl... On top of, or below the cork gasket?
I gotta figure out how that screen is supposed to be fit into the top of the sediment bowl... On top of, or below the cork gasket?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Yes.
Yes, when I put it on that way, I think the screen was getting in the way of the gasket making a good seal. It's kind of old and "disfigured" - something I can relate to personally after working on the farm all afternoon
So I put it underneath and it seems to be working OK but I'm worried about floating sediment getting by it and to the carb... Gonna have to spend a few hours on that one of these days!
So I put it underneath and it seems to be working OK but I'm worried about floating sediment getting by it and to the carb... Gonna have to spend a few hours on that one of these days!
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- Dale51
- 10+ Years
- Posts: 568
- Joined: Sun Aug 10, 2003 3:39 pm
- Location: Wellsville NY
Re: Yes.
allenlook wrote:Yes, when I put it on that way, I think the screen was getting in the way of the gasket making a good seal. It's kind of old and "disfigured" - something I can relate to personally after working on the farm all afternoon
So I put it underneath and it seems to be working OK but I'm worried about floating sediment getting by it and to the carb... Gonna have to spend a few hours on that one of these days!
Your going to have dirt get by it that way.
I have seen that you spent alot of money so far on this project so whats a few dollars more.
You can buy just the screen at TSC stores & NAPA should be able to get them also.
If it's been broken I did it.
If its not broken wait till I touch it.
If its not broken wait till I touch it.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Screen...
Is the screen attached to the cork gasket, or is it a separate item?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Thanks
Thanks Rudi, when I put the screen on top of the cork gasket, it leaks like a seive.
I can't get the little screen close enough back to "round" I guess... I'll have to pick one up when I'm over at Randall Equipment - gotta go pick up the hydraulic manifold gasket to cure a steady drip.
I can't get the little screen close enough back to "round" I guess... I'll have to pick one up when I'm over at Randall Equipment - gotta go pick up the hydraulic manifold gasket to cure a steady drip.
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Again!?
Well, everything was great, I was doing some more mowing and dragging some steel parts out of the woods that I found today, when Jay started sputtering AGAIN?!
Got back to the barn, everything seemed OK, started mowing again, and he started sputtering AGAIN!
This time I'll check for sediment in the carb and get that screen in the sediment bowl replaced ASAP...
Oh, and I'll revert to step 1
Got back to the barn, everything seemed OK, started mowing again, and he started sputtering AGAIN!
This time I'll check for sediment in the carb and get that screen in the sediment bowl replaced ASAP...
Oh, and I'll revert to step 1
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Who is online
Users browsing this forum: No registered users and 42 guests