This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Light Switch Wiring
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 23
- Joined: Tue May 18, 2004 11:54 am
- Location: Walden, NY
Light Switch Wiring
My 52' has a light switch that is rectangular as you look at it from the back, I can't figure how to wire it properly cause it doesn't match any of the pictures in my service manuals. Mine is 6 volt battery ignition (no mag.) The switch has 6 connection points the two on the right side are always hot based on my continuity check, other 4 are hot depending on switch pos. 1 or 2. Left over wires are 1 from headlight, 1 from tail light 1 from fuse housing and 1 from ammeter? How do I wire to get high and low beams and taillight correct? I was told that there are supposed to be resistors somewhere? If you havent' guessed electric isn't my best subject. Thanks for any help!!!
Cub is running again! Just troubleshooting now!
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
And here's a picture to help too:
http://www.cleancomputes.com/Cub/Cub%20Owner's%20Manuals/Page%2034.jpg
http://www.cleancomputes.com/Cub/Cub%20Owner's%20Manuals/Page%2034.jpg
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 23
- Joined: Tue May 18, 2004 11:54 am
- Location: Walden, NY
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
It's a wire wound (Nichrome - I think) 5 ohm resistsor. Delco 814545. Wattage capacity is about 20 - 25 watts. It is switched in series with the headlights in the dim position.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 334
-
by Scrivet
Wed Apr 28, 2021 7:46 am
-
- 6
- 340
-
by Rick Spivey
Tue Jan 11, 2022 9:02 pm
-
- 4
- 176
-
by Dusty B
Mon Aug 29, 2022 9:02 pm
-
- 16
- 528
-
by Leewebb7
Thu Apr 25, 2024 4:01 pm
-
- 6
- 148
-
by Waif
Mon Jul 25, 2022 9:31 am
Who is online
Users browsing this forum: Leewebb7, Majestic-12 [Bot], tucker86 and 8 guests