This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

single point

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Ricaroo
10+ Years
10+ Years
Posts: 179
Joined: Sat Jun 19, 2004 5:37 pm
Location: New Hampshire

single point

Postby Ricaroo » Wed Oct 13, 2004 3:48 pm

I would like to get a single fast hitch point for my cub, Sometime ago I check out a site that had them in 2 different lenths. I want to build a carring platform and I can't remeber the www address for the point and which sould I get long or short?

Thanks for the help
Rick
1958 cub
1939 A

SPONSOR AD

Sponsor



Sponsor
 

User avatar
cjpenny89
10+ Years
10+ Years
Posts: 1080
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

Postby cjpenny89 » Thu Oct 14, 2004 5:37 am

I think it was here http://www.agri-supply.com/

User avatar
Ricaroo
10+ Years
10+ Years
Posts: 179
Joined: Sat Jun 19, 2004 5:37 pm
Location: New Hampshire

Postby Ricaroo » Thu Oct 14, 2004 9:27 am

Thank You that is the site I was reffering to.

I want to build the platform used on the rear of the cub, does anyone have any pics or could someone tell me if you use the long or short single point?

Thanks
Rick

User avatar
Ralph
Cub Pro
Cub Pro
Posts: 2673
Joined: Sun Feb 02, 2003 7:01 pm
Zip Code: 41005
Tractors Owned: Near 200 cubs through the years
Circle of Safety: Y
Location: Ky Florence Y'ALL

Postby Ralph » Thu Oct 14, 2004 11:46 pm

I have found the points at salvage yards that were taken off other implements usually around 30 bucks.

People kid me about it says it looks like a park bench because of the legs hanging down . But those legs are handy if you want to unhook it from the tractor with a load on it . The lega are long enough that it will set on 4x4 and you can unhook or hook-up with out having to get off the cub.

Image

Image


Image
Shoot low Sherriff they are Riding Shadows
4 Wheels move the body.....
2 Wheels move the Soul .....


Ralph in ky.

User avatar
Ricaroo
10+ Years
10+ Years
Posts: 179
Joined: Sat Jun 19, 2004 5:37 pm
Location: New Hampshire

Postby Ricaroo » Fri Oct 15, 2004 4:07 am

Ralph, Thank You very much I appreciate the info.

Rick

SundaySailor
10+ Years
10+ Years
Posts: 1041
Joined: Mon Jun 28, 2004 1:45 pm
Zip Code: 00000
Tractors Owned: 1950 Cub
2000 Simplicity Landlord DLX
1988 JD 322 Garden Tractor with hydraulic scoop, 54" scrape blade and 48" mower deck, Haban 3 pt hitch sickle bar mower

2014 LS XR3032H w/ FEL and BH
Circle of Safety: Y

Nice Job!

Postby SundaySailor » Fri Oct 15, 2004 6:31 am

Ralph,

Go ahead and let them laugh. That is one nice piece of work you have there. Wish I had that kind of talent. Don't have the shop and I don't have the welding experience either.

Rick
Though trillions and trillions of eyes have been watching the skies for as long as human memory exists, no gods nor angels have been seen or documented outside of religion. The number of spaceships being sighted however has become much more prevalent.

User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Sat Oct 16, 2004 5:15 pm

Something like that could be built with drilling and bolting. It would take some amount of hacksaw work but it could be done. It would not be quite as pretty and probably not as strong but you would have to be hauling rocks or pig iron to notice the diff.
Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 60 guests