IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
7 posts • Page 1 of 1
You are talking about two very different animals. The regular Cub flywheel/clutch will bolt right up to your engine, but you will have no way to connect the driveline with its' funky remote clutch. There's a good reason your tractor has the starter/generator.
Let's concentrate instead on making your starter/generator system work as it should. It's a good system.
The most affectionate creature in the world is a wet dog. Ambrose Bierce
I'm not very familiar with the number series, but wasn't the 185 basically the same tractor except with a standard starter
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
John - I believe the 154 and 185 had the starter / generator. The 184 had a standard starter.
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
CN used a 10HP Briggs engine for different applications. All of the engines had starter generators on them. Sometimes the regulators would be a little combative, but they worked well.
I know for sure that they could fit on a regular Cub, I'll have to check the rotation, but do you think they would turn the crank on a Cub? I'm think they probably will, and would be a good back-up if you had to send your starter away.
I have a couple spares and have been wanting to experiment.
I'm not familiar with the number series either. Does the 154 have the same engine as a regular Cub?
Just Do It !
I aggree with George, fix the orginal starter/generator. My 1977 184 serial #45805 is about 200 units earlier than the conversion to a seperate starter and generator done sometime around Nov. of '77. The unit was bad when I purchased it. A trip to the local auto electric shop ( where I've had other 6 and 12 volt starters and generators rebuilt) cured the problem.
Although there is a place to mount a starter, there is no flywheel. Installing one would be quite a daunting task. My rebuilt starter/generator turns over the engine with ease and starts a properly tuned engine in 2-3 seconds. It also maintains a charge when the electrical system is under max. load with all the lights on bright and electric PTO engaged. Just make sure the belt is tensioned properly.
I paid just under $100 to have the orginal unit totally rebuilt. Well worth the money. Although I have 2 '48 FCUBs which I enjoy, the 184 is my favorite. It has the same C-60 engine, transmission and rear end, amoung other thing as it's grandfathers (the '48s) yet handles and rides so differently, with much more power. Now, if I could only find the 3-point hitch accessory for it........
Just my thoughts,
7 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest