This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Cub 54-A Decals

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Donny M
10+ Years
10+ Years

Cub 54-A Decals

Postby Donny M » Thu Nov 04, 2004 6:29 pm

Does anyone have info about the decals and placement of for the Cub 54-A blade :?:
The manual has only one picture of a decal and the picture is poor at best.

Jim Becker :?: 8)
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
ScottyG
10+ Years
10+ Years
Posts: 422
Joined: Sun Jul 18, 2004 7:49 pm
Location: Watkins Glen, NY

Postby ScottyG » Thu Nov 04, 2004 7:13 pm

This probably won't help a bit but I have the word International decaled across one of the lifting arms. My 54's a bit newer. Probably from the early 1960's but there you are...
"Henry" 1948 Farmall Cub
Top
Donny M
10+ Years
10+ Years

Postby Donny M » Thu Nov 04, 2004 7:20 pm

Scotty,

Before I put the frame in the de-rusto tank it had Cub 54A on each side of the frame. On the back side of the blade it had an International and a 54 centered underneath that.

Shoot I wish I had taken pictures before :!: :( 8)
Top
User avatar
Jim Hudson
10+ Years
10+ Years
Posts: 1224
Joined: Sun Feb 02, 2003 1:11 pm
Zip Code: 28001
Location: Albemarle, North Carolina 28001

Postby Jim Hudson » Thu Nov 04, 2004 9:21 pm

Mine had International on the back of the blade and 54-A
Image
Young man for work, old man for advice
Top
Donny M
10+ Years
10+ Years

Postby Donny M » Thu Nov 04, 2004 9:28 pm

Thanks Jim :!:
Mine looked the same as yours except white. I didn't know if there were any more decals or not. 8)
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Thu Nov 04, 2004 11:34 pm

Mine is older than Jim Hudson's. It has a Cub-54A decal on one side of the frame, similar location as JH's, different decal. I think the other side has a patent decal. Don't recall any other without looking. This is one of those things that changed over the years. The older ones don't have a model id plate either.
Top
User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:
Contact Rudi

Postby Rudi » Fri Nov 05, 2004 8:39 am

Jim:

K, so we are restoring our 54's. What decals should we be looking for? Is there a part number for the Decal kit? Seeing as I don't have a 54 manual, I can't look that up....

would like to be as accurate as possible.

thanks
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

Top
User avatar
Jim Hudson
10+ Years
10+ Years
Posts: 1224
Joined: Sun Feb 02, 2003 1:11 pm
Zip Code: 28001
Location: Albemarle, North Carolina 28001

Postby Jim Hudson » Fri Nov 05, 2004 11:52 am

I only have a 54A. It was white when new had International across the top back of the blade and a IH emblem on the right end and 54A on the frame. I have read on this board that someone had decals for one of the blades but don't know which. I think I read that the dealer could get one of them. I only know what I read here on the board. Mine has no decals now and is all red. And muddy. I decided to use my Cub. Most people who come in my shop don't know what it is are how its supposed to look.
Young man for work, old man for advice
Top
User avatar
ScottyG
10+ Years
10+ Years
Posts: 422
Joined: Sun Jul 18, 2004 7:49 pm
Location: Watkins Glen, NY

Postby ScottyG » Mon Nov 15, 2004 9:11 pm

Well since I'm restoring my 54A, I'd be interested in a label kit. As soon as one becomes available, let me know.
"Henry" 1948 Farmall Cub
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 30 guests

      
cron