This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

draw bars

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
mikeintn
10+ Years
10+ Years
Posts: 393
Joined: Tue Nov 21, 2006 12:39 pm
Location: Blountville, TN.

draw bars

Postby mikeintn » Tue Mar 17, 2009 11:36 am

Will someone tell me if a cub and SA drawbar is the same width, I have 5 or 6 and was going to sell some but want to make sure what they are, I throught they was SA but some are about 5/8 thick and some 3/4. Thanks
Mike
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: draw bars

Postby Jim Becker » Tue Mar 17, 2009 2:24 pm

I think the width is pretty close to the same. The side brackets are a lot different. I think the hole/slot spacing at the final drive housings is bigger on the Super A. Also, the Super A has 4 holes for height adjustment while the Cub has 3.
Top
mikeintn
10+ Years
10+ Years
Posts: 393
Joined: Tue Nov 21, 2006 12:39 pm
Location: Blountville, TN.

Re: draw bars

Postby mikeintn » Tue Mar 17, 2009 3:58 pm

Ok what about some is made out of 5/8 and some 3/4 thick would that be different years or just a heavy duty.
Mike
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: draw bars

Postby Jim Becker » Tue Mar 17, 2009 4:20 pm

Drawbar part number never changed and no alternate versions for either the Cub or 140. Since you have a half dozen examples, sort them out by by tractor model then measure each and report back what you find.
Top
User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: draw bars

Postby Boss Hog » Wed Mar 18, 2009 10:06 am

The early A draw bar was different from the SA The cub is quit a bit lighter than the SA
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Top
mikeintn
10+ Years
10+ Years
Posts: 393
Joined: Tue Nov 21, 2006 12:39 pm
Location: Blountville, TN.

Re: draw bars

Postby mikeintn » Wed Mar 18, 2009 9:49 pm

I have pictures, I'll see if I can get them on here.
Mike
Top
Post Reply

Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 2 guests