starter question
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 136
- Joined: Sun Feb 17, 2008 12:32 pm
- Zip Code: 00000
starter question
My 6 volt tractor is a buggerbear to start. I had the battery checked and it was good although they did have to charge it. I noticed while trying to start It yesterday that the starter gets pretty hot to the touch and every now and then the starter will go wizzz. Like it spinning freely, but not actually trying to turn the moter over. Is this normal for a 6 volt?
-
- Cub Pro
- Posts: 24141
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: starter question
Sounds like it is dragging a bit and sometimes the bendix is not kicking out fast enough to engage. It should probably be rebuilt.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
-
- 10+ Years
- Posts: 136
- Joined: Sun Feb 17, 2008 12:32 pm
- Zip Code: 00000
Re: starter question
Thanks Bigdog, I was a little afraid of that. This tractor may give me some wrench time. There are a number of things that I would like to tinker with, that wasn't one of them. We had a toad floater this afternoon and as soon as my yard isn't a mud hole, I will be playing with it.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Farmall 200 Replaced Starter and still no start
by CumminSHO » Tue Aug 25, 2015 7:53 am » in Farmall C, Super C, 200 & 230 - 43
- 2959
-
by Matt Kirsch
Fri May 20, 2016 1:39 pm
-
-
-
RPM Question Attachment(s)
by 64/67lo-boy » Sun Oct 22, 2017 4:16 pm » in Farmall C, Super C, 200 & 230 - 3
- 295
-
by 64/67lo-boy
Tue Oct 24, 2017 11:53 am
-
-
- 5
- 535
-
by havoc1482
Tue Sep 01, 2015 7:58 pm
-
-
Farmall 230 Hydraulic Question
by Brandon Webb » Fri Dec 08, 2017 1:49 pm » in Farmall C, Super C, 200 & 230 - 3
- 239
-
by Brandon Webb
Fri Dec 08, 2017 9:01 pm
-
-
-
6v generator w/cutout question
by mikes5785 » Thu Aug 31, 2017 9:53 am » in Farmall C, Super C, 200 & 230 - 3
- 268
-
by Jim Becker
Thu Aug 31, 2017 11:39 am
-
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 0 guests