We fans of these cubs want (yes, demand!) results of the test.
BIGHOSS
Dyno RatingsModerator: Team Cub
27 posts
• Page 1 of 2 • 1, 2
Dyno RatingsOK guys, I was there in person and was a witness to the tests run on "Cubota", "Flamey" and others. All I saw were numbers on a clipboard. We want HP rating after the numbers were crunched.
We fans of these cubs want (yes, demand!) results of the test. BIGHOSS 1947 Cub S/N 9216 (My Dad's "Uncle Bob")
We make a living by what we get, but we make a life by what we give......Winston Churchill
Re: Dyno RatingsGuess I better get busy and enter the numbers into the computer and transfer them here
Rick When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsHere's CUBOTA's readings. You'll notice the excel graph that we made up for a normal cub stops at 2500 rpm's. Note: CUBOTA is not normal
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsNutz, I get an error bar that says "xlxs" is not allowed as an attachment
any ideas??? edit: it says xlsx, not xlxs Last edited by Rick Prentice on Mon May 11, 2009 11:51 am, edited 1 time in total.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsRick - send Dennis a PM. I'm sure that at one time XLS files were permissible.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem. My wife says I don't listen to her. - - - - - - - - Or something like that! http://www.cubtug.com
Re: Dyno Ratings.xls files are allowed, don't know about .xlxs? (was this a typo??) Convert it to a .pdf and it will upload.
Re: Dyno RatingsAny other fcub numbers???
Someday i'd like to build a C60 and have it on the dyne. I have a feeling we can get some higher numbers out of it with some tricks i learned in the past. I wish our old flat head guru was still alive from the old dirt track stock days to get some advise from. He had an old flat head ford v8 running head to head with the 350 chevy's on the track. Of course its the driver and the suspension too but the power comes from the engine. I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Re: Dyno RatingsRick,
I'm pretty sure that we shook hands, but don't remember for sure. I watched you work on several carbs, one that Dale had was mine. You were going to make up a gas line for me also, but I had to leave and don't know if you got to it. I left Dale in charge of taking care of it, in case you made it. You were a busy man. Thanks for all you did at the "Bash". I'm the one that you got the small hyd cylinders from. BIGHOSS Ron Smith 1947 Cub S/N 9216 (My Dad's "Uncle Bob")
We make a living by what we get, but we make a life by what we give......Winston Churchill
Re: Dyno Ratings
I remember you now. Guess I didn't here you say Bighoss. I was just out looking over the cylinders and daydreaming Thanks Ron, Rick When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsWas kindof a typo. It say xlsx instead Now if I could find how to convert to pdf Raymond, Dennis is trying to get things ironed out over in the "Testing Forum" for me. Thanks, Rick When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsRick,
If you e-mail the data and graph file to me I can both fix your graph and save to a pdf for you. Side effect of being an engineer - proficiency in Excel and manipulating data. Bill 1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Re: Dyno Ratings
I just never heard of a .xlxs excel file!! New to me! I can also convert to pdf if you need. Thanks, Raymond
Re: Dyno RatingsBill, I just sent you some results. Send me the Excel conversion for Dummies manual, will you
Thanks abunch, I still want to get this stuff figured out so I can do it, maybe Rick When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsI'm still working and waiting on some tweeking, but you can get an idea of the results if you squint or put on your bi-focals ![]() Rick When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Re: Dyno RatingsAgain, sorry for the poor quality. This is FLAMEY's results.
![]() Rick When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
27 posts
• Page 1 of 2 • 1, 2
Who is onlineUsers browsing this forum: Criswell, Glen, Jim Becker and 6 guests |
|