crankshaft pulley notches
Moderator: Team Cub
2 posts
• Page 1 of 1
crankshaft pulley notches
by dw » Wed May 13, 2009 7:58 am
Why does my crankshaft pulley have 2 notches on it? Which one do i use? The one with 1 notch or the one with 2 notches ? Is T.D.C. inbetween the two sets? It is on a farmall h and also an "m".
- dw
- Posts: 38
- Joined: Fri Dec 09, 2005 11:43 pm
Re: crankshaft pulley notches
by Bigdog » Wed May 13, 2009 8:15 am
The second notch to pass the pointer will be the TDC notch. The first notch will indicate the degrees of advance when the distributor advances. Static time to the second notch and confirm advance with a timing light using the first notch.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|