Northern tool MIG 135 review

Tools and Reviews to help your fellow Cubber's.

Moderator: Team Cub

Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.

FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.

Send issues regarding reviews to Cub@farmallcub.com.

Northern tool MIG 135 review

Postby grunt » Mon May 25, 2009 12:37 am

viewtopic.php?f=4&t=40447

Ok.. so I finally got a chance to use my mig and I got to say it as Borat would… niiiiice. I had a lot of fun playing around with the voltage and wire feed rate to see what worked best for the metal I was working on. It was also nice to see how the bead changed due to adjusting these two variants.
I took all the welds I made and put them in a vice and started to beat them profusely with a hammer to see if they would hold. To my surprise even my crap welds brought on by inexperience seem to make the cut and held there bond. I did not have any gas to try it with the non flux core wire but I feel pretty sure that there welds would be as least as good if not better. Also one more thing, whoever said that using Pam cooking spray as a anti splatter for your tips was a smart man. I am more than ¾ of the way through on my 10lb real of flux core wire and my welding tip looks just as clean after I wipe it as it did brand new. I had a lot of fun with this tool which you will see is pretty much indicative of the reviews on northern tool web site.
I would highly recommend this to any one as their first mig welder and I would buy it again. I have a few projects on my list that I will hopefully soon start after I get my root cellar in and purchase some metal to work with, because we all need something else to spend our money on.
grunt
5+ Years
5+ Years
 
Posts: 231
Joined: Fri Mar 14, 2008 11:32 am
Location: Mondamin Iowa
Zip Code: 51557
eBay ID: spec [77]
Tractors Owned: 52 cub
40ish Farmall M with JD bucket

Return to Tool Talk and Reviews

Who is online

Users browsing this forum: No registered users and 0 guests