hey evryone
i have a farmall A this this runs awsome will go out in -10* and a couple cranks it will fire right up but after about 20 minutes, half hour it will jsut die its like shutting off a switch, wait couple hours or the next day go out and it will fire right up. after it dies i have taken the wire coming out of the mag off and crank it over and it will have lots of spark and im out of ideas on whats going on so if anyone could help me that would be great
kyle.m
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
help with farmall A
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7
- Joined: Mon Nov 27, 2006 12:21 pm
- Location: grand valley ontario
- Contact:
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: help with farmall A
If you still have spark when it dies then you have a fuel supply issue. Look for debris in the tank and remove the fuel line from the carb when it stops to check the flow.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 7
- Joined: Mon Nov 27, 2006 12:21 pm
- Location: grand valley ontario
- Contact:
Re: help with farmall A
allright thnaks i will try that tomarow
thanks kyle.m
thanks kyle.m
- Andy Motteberg
- 10+ Years
- Posts: 33
- Joined: Tue Jan 06, 2009 8:45 pm
- Zip Code: 00000
- eBay ID: 1943farmallh
- Tractors Owned: 1943 Farmall H
1949 Farmall M
1941 Farmall M
1938 Farmall F-20
1949 John Deere A
1941 John Deere B - Location: Detroit Lakes, MN
- Contact:
Re: help with farmall A
Check the fuel flow and make sure that there are no air leaks where the carb bolts on the manifold. Make sure the coil is not HOT after the tractor is shut off.
1943 Farmall H
1949 Farmall M
1938 Farmall F-20
1949 John Deere A
1941 John Deere B
http://antiquetractorsforum.com/
http://www.youtube.com/AndyMotteberg
1949 Farmall M
1938 Farmall F-20
1949 John Deere A
1941 John Deere B
http://antiquetractorsforum.com/
http://www.youtube.com/AndyMotteberg
-
- 10+ Years
- Posts: 7
- Joined: Mon Nov 27, 2006 12:21 pm
- Location: grand valley ontario
- Contact:
Re: help with farmall A
well i checked my fule flow before i started it and there was lots of flow, start it up and it sat there and idel for a good hour went out and reved it up and it put out some black smoke then started to die, checked my fule flow still lots of fule flow so i thought mabey my vent in my gas cap was pluged and it was sucking on the tank and not geting air but no luck after it died i took the cap off and there was no sucktion noice or nothing. checked the spark and lots of spark so i put the choke on and cranked it over and it puffed out a little bit of white smoke but never fired.....so im confused cause the only thing that would make it smoke is getting too much fule
please help if you have any idea
thanks kyle.m
please help if you have any idea
thanks kyle.m
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: help with farmall A
Flooding. Sounds like a carburetor problem. Needle valve problem.
I have an excuse. CRS.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: workinonit and 7 guests