SC touch control
Sun Jun 07, 2009 9:59 pm
Is there any special trick getting the hydraulics to work on a Super C? I pull/push the levers and nothing! It was working before I brought it home. I haven't tried it till today
Re: SC touch control
Mon Jun 08, 2009 7:51 am
nope, other than the engine has to be running. 
Might want to check the fluid level, they have the same problem with the seal/o ring leaking into the engine as a cub has. The touch control manual in the Blue Ribbon section of Rudi's server covers Super A and C, as well as cub.
Might want to check the fluid level, they have the same problem with the seal/o ring leaking into the engine as a cub has. The touch control manual in the Blue Ribbon section of Rudi's server covers Super A and C, as well as cub.
Re: SC touch control
Mon Jun 08, 2009 8:12 am
Thanks.
Yes, I had engine running and I just added fluid, but I mowed all day, so I will check to see if it leaked out.
Yes, I had engine running and I just added fluid, but I mowed all day, so I will check to see if it leaked out.