Rubber Washers

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Rubber Washers

Postby EZ » Tue May 26, 2009 8:08 pm

I was looking at replacing the rubber washers on the transmission drive shaft joint on my 130.

There are 8 required. Part#43550

No longer available says CASE IH.

Any ideas on aftermarket, or suitable replacements?

Thanks,
Ed
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Rubber Washers

Postby WKPoor » Sun May 31, 2009 8:11 am

Look in McMaster Carr catalog.
WKPoor
 

Re: Rubber Washers

Postby John *.?-!.* cub owner » Sun May 31, 2009 8:53 am

Ed, have you actually called a dealer rather than just looking up on line? I have had a lot of problems with parts saying not available when I looked them up on websites, but were still available. Sometimes the part number had changed, sometimes there was a difference in the way the number was entered (spaces, hyphens, etc.).
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19105
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Rubber Washers

Postby Jim Becker » Sun May 31, 2009 10:44 am

Yeah, what John said. You left the "D" off the part number. It is 43550D.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11853
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Rubber Washers

Postby EZ » Sun May 31, 2009 9:39 pm

Thanks guys,

I'll try that with the D when I call the CNH dealer again.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Rubber Washers

Postby BigBill » Sat Jun 06, 2009 6:06 pm

Have you tried ebay???

Can one be made from a mudflap?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
BigBill
501 Club
501 Club
 
Posts: 5632
Joined: Sat Jul 22, 2006 5:02 pm
Location: in northern usa
Zip Code: 00000

Re: Rubber Washers

Postby EZ » Sun Jun 07, 2009 11:44 am

Bigbill,

No I did not think of Ebay. Hmmmmmmmmmm.....

Mudflap sounds like a great idea. What can be so special about 8 rubber washers?

I suppose thickness, and elasticity are the biggest factors.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Rubber Washers

Postby John *.?-!.* cub owner » Sun Jun 07, 2009 3:35 pm

EZ wrote:Bigbill, What can be so special about 8 rubber washers?
They have to be strong enough to stand the torque of the engine, the bolts actually push against them, using them like shock absorbers.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19105
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Rubber Washers

Postby Bus Driver » Sun Jun 07, 2009 5:21 pm

Rubber hardness is measured by durometer, the higher the number, the harder the rubber. Rubber changes durometer somewhat as it ages, thus a used part might not have the same properties as new. If scarcity of these parts appears to be near, it would be very useful if the person finding a new one would take it to a commercial/industrial rubber supplier for identification of the durometer and other characteristics. Such suppliers can get equivalent material and cut it to any shape/size required. The specifications would be most welcome for my records.
Luck favors those who are prepared
User avatar
Bus Driver
Team Cub Mentor
Team Cub Mentor
 
Posts: 2620
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Rubber Washers

Postby Phillip W. Lenke » Mon Jun 15, 2009 11:30 am

joes farmall has them www.joesfarmall.com
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest