Would like to know the diameter that came standard for a 1940 Farmall M
Thanks
Phil
Farmall M Belt Pully
Moderator: Team Cub
6 posts
• Page 1 of 1
Farmall M Belt Pully
by Phillip W. Lenke » Wed Jun 17, 2009 7:57 am
"Work Hard ,Play Often,Care Always"
- Phillip W. Lenke
- 501 Club
- Posts: 1474
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall M Belt Pully
by KETCHAM » Wed Jun 17, 2009 8:00 am
Should be the same as my H.They had paper and steel ones,differnt diameters.Range in price $25.00 up!!! I'll measure mine tonight.Kevin 
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
KETCHAM - 501 Club
- Posts: 5453
- Joined: Thu Jul 28, 2005 2:37 pm
- Location: Marshallville Ohio
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
Re: Farmall M Belt Pully
by Phillip W. Lenke » Wed Jun 17, 2009 8:05 am
Thanks
"Work Hard ,Play Often,Care Always"
- Phillip W. Lenke
- 501 Club
- Posts: 1474
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall M Belt Pully
by Dusti Snider » Wed Jun 17, 2009 4:05 pm
Phil,
I don't know that you could call one "standard", but probably the 11" if I were guessing. I know that the steel and paper pulleys came in the same 5 sizes: 6-1/2", 9-3/4", 11", 12", and 13"
Dusti
I don't know that you could call one "standard", but probably the 11" if I were guessing. I know that the steel and paper pulleys came in the same 5 sizes: 6-1/2", 9-3/4", 11", 12", and 13"
Dusti
Member IHCC Chapter 37 Eastern North Carolina
1951 Farmall "M" - Restored
1949 Farmall Cub - Original "Blue Ribbon Reconditioned"
1929 Farmall Regular
-
Dusti Snider - Cub Star!!
- Posts: 488
- Joined: Tue Feb 04, 2003 9:10 am
- Location: Mercer County, West Virginia
- Zip Code: 24740
- Tractors Owned: 1951 Farmall "M" - Restored
1949 Farmall Cub - Original "Blue Ribbon Reconditioned"
1929 Farmall Regular
1956 Ford 640
1967 John Deere 112H
1973 John Deere 140H3
1985 John Deere 420 
- Circle of Safety: Y
Re: Farmall M Belt Pully
by Jim Becker » Wed Jun 17, 2009 8:03 pm
M came with an 11 inch pulley. The H and M pulleys run at different speeds, therefore they normally have different sized pulleys to get similar belt speeds.
The H belt pulley runs 1019 rpm. With the regular 9 3/4 x 7 1/2 inch pulley, the belt speed is 2601 fpm.
The M belt pulley runs 898 rpm. With the regular 11 x 7 1/2 inch pulley, the belt speed is 2587 fpm.
The H belt pulley runs 1019 rpm. With the regular 9 3/4 x 7 1/2 inch pulley, the belt speed is 2601 fpm.
The M belt pulley runs 898 rpm. With the regular 11 x 7 1/2 inch pulley, the belt speed is 2587 fpm.
-
Jim Becker - Team Cub
- Posts: 11240
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: TX
- Zip Code: 75048
- Circle of Safety: Y
Re: Farmall M Belt Pully
by KETCHAM » Wed Jun 17, 2009 8:52 pm
Yep 9 3/4" inch on mine.I see others kicked in on better anwsers!! Hope to see ya this weekend!!! Kevin 
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
KETCHAM - 501 Club
- Posts: 5453
- Joined: Thu Jul 28, 2005 2:37 pm
- Location: Marshallville Ohio
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
6 posts
• Page 1 of 1
Return to Farmall M, Super M, 400, 450, & 560
Who is online
Users browsing this forum: No registered users and 1 guest
|
|