Would like to know the diameter that came standard for a 1940 Farmall M
Thanks
Phil
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall M Belt Pully
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Farmall M Belt Pully
"Work Hard ,Play Often,Care Always"
- KETCHAM
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
- Contact:
Re: Farmall M Belt Pully
Should be the same as my H.They had paper and steel ones,differnt diameters.Range in price $25.00 up!!! I'll measure mine tonight.Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
- Dusti Snider
- 10+ Years
- Posts: 601
- Joined: Tue Feb 04, 2003 9:10 am
- Zip Code: 24739
- Tractors Owned: 1951 Farmall "M" - Restored
1949 Farmall Cub - Original "Blue Ribbon Reconditioned"
1953 Farmall Super AI
1934 Farmall F-12
1929 Farmall Regular
1956 Ford 640
1972 Ford 4000 - Circle of Safety: Y
- Location: Mercer County, West Virginia
Re: Farmall M Belt Pully
Phil,
I don't know that you could call one "standard", but probably the 11" if I were guessing. I know that the steel and paper pulleys came in the same 5 sizes: 6-1/2", 9-3/4", 11", 12", and 13"
Dusti
I don't know that you could call one "standard", but probably the 11" if I were guessing. I know that the steel and paper pulleys came in the same 5 sizes: 6-1/2", 9-3/4", 11", 12", and 13"
Dusti
Member IHCC Chapter 37 & 42 - North Carolina
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall M Belt Pully
M came with an 11 inch pulley. The H and M pulleys run at different speeds, therefore they normally have different sized pulleys to get similar belt speeds.
The H belt pulley runs 1019 rpm. With the regular 9 3/4 x 7 1/2 inch pulley, the belt speed is 2601 fpm.
The M belt pulley runs 898 rpm. With the regular 11 x 7 1/2 inch pulley, the belt speed is 2587 fpm.
The H belt pulley runs 1019 rpm. With the regular 9 3/4 x 7 1/2 inch pulley, the belt speed is 2601 fpm.
The M belt pulley runs 898 rpm. With the regular 11 x 7 1/2 inch pulley, the belt speed is 2587 fpm.
- KETCHAM
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
- Contact:
Re: Farmall M Belt Pully
Yep 9 3/4" inch on mine.I see others kicked in on better anwsers!! Hope to see ya this weekend!!! Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 5 guests