Valve springs for a M

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Valve springs for a M

Postby Phillip W. Lenke » Thu Jul 02, 2009 12:39 pm

1944 M head high compression. My question is
The exhaust valves have a roto cap, Intake are stamped caps
When I removed the old springs the intake had an extra coil longer on the spring
Bates Corp. sent 8 springs the length of the exhaust valves only. Thy have been checking but have not got an answer yet.
Any Ideas where I can get the longer springs
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: Valve springs for a M

Postby Gary Dotson » Fri Jul 03, 2009 6:38 am

Phil, if you can't come up with the longer springs, you could put rotors on the intake as well. (if you can find those)
Gary Dotson
Team Cub Mentor
Team Cub Mentor
 
Posts: 2511
Joined: Thu Aug 03, 2006 6:20 am
Location: OH West Mansfield
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety Award
Circle of Safety: Y

Re: Valve springs for a M

Postby Phillip W. Lenke » Sat Jul 04, 2009 9:29 am

I can get them They are $16 bucks each.
used.
I may have to go that route though.
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449


Return to Farmall M, Super M, 400, 450, & 560

Who is online

Users browsing this forum: No registered users and 1 guest