This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub brush hog?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Cub brush hog?
Can a Cub run a brush hog, does it have enough power to cut down 3 months growth of weeds, thickets and small saplings?
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
Re: Cub brush hog?
3 months growth? I'll say yes. I have used a Woods42 to do some pretty serious mowing, way more than 3 months thick growth. I would do a complete ignition tune-up and adjust the valves before trying it. And sharpen the blades on the mower. If your Cub is in good shape otherwise, I think you'll find it can do the job. You might not do it real fast, but you can get it done.
Trent McPeak
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Cub brush hog?
I agree with Trent, your Cub should be in top shape to handle the heavy green stuff.
Here is a post with video of Song mowing with his Cub. The stuff looks pretty high to me, more than three months worth.
Don't recommend pushing the limits of the center of gravity of the tractor though!
viewtopic.php?f=1&t=43040&hilit=+mower
Here is a post with video of Song mowing with his Cub. The stuff looks pretty high to me, more than three months worth.
Don't recommend pushing the limits of the center of gravity of the tractor though!
viewtopic.php?f=1&t=43040&hilit=+mower
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
Re: Cub brush hog?
I have cut through much worse than in Song's video. Late last summer, I cut 3/4 of an acre with Russian olives 7 ft tall in clumps with multiple trunks the size of your thumb. I didn't mow along fast and steady, but I got it done. I wanted to see what the "new" LoBoy I had bought had, plus I needed it mowed for a deer food plot. I was very pleasantly surprised with my '55 LoBoy and Woods42.
Trent McPeak
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Cub brush hog?
If you are talking about a standard pull type Brush Hog, no. PTO turns the wrong way and too fast, but with a Woods 42, or International C2, or Mott flail, it will do the job
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Cub brush hog?
On top of what the others said, I would add that you may want to raise the mower for the first pass. I have cut some serious stuff with a C-2 mower.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
Re: Cub brush hog?
John *.?-!.* cub owner wrote:If you are talking about a standard pull type Brush Hog, no. PTO turns the wrong way and too fast
Very good point. Question: Wouldn't a Cub equipped with a PTO reducer/reverser handle a 4-ft pull-behind brush hog? I haven't tried it, but plan to if I can find a good mower.
Trent McPeak
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Cub brush hog?
Don't forget the model 412 bush hog
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: Cub brush hog?
Horsepower. I have a 34 HP diesel that just makes it with a 6 foot brush hog. According to the dealer I am a little under HP for that size hog.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
- TexCub
- 10+ Years
- Posts: 573
- Joined: Sun Oct 01, 2006 5:53 pm
- Zip Code: 77316
- Circle of Safety: Y
- Location: TX, Montgomery
Re: Cub brush hog?
This was a few months worth of Johnson Grass, took me a couple passes and went slow, taking only about 1/2 a mower width in the thickest spots. Also had just replaced the blades, as the old ones were totally shot. Most of the grass was as high as the hood, with the seed heads being above my head.
Dave
Dave
53 Cub, C-2 mower, grader blade, cultivators, & a few plows
-
- 10+ Years
- Posts: 1224
- Joined: Wed Jul 02, 2008 6:11 am
- Location: MN, Mankato
Re: Cub brush hog?
Depending on how many and how large the saplings you may want to cut them with a chain saw and remove the debris. I went over small 1-2 inch saplings with my Mott flail mower. It did chop them off, but rough. I agree to raise the deck the 1st pass. Also, you can make partial passes where then entire mower isn't cutting. I was able to mow grass up to the head lights just as Dave posted.
Todd
Todd
- ToddW
- Cub Pro
- Posts: 2293
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower - Circle of Safety: Y
Re: Cub brush hog?
I have mowed grass with seed heads higher than the hood with a woods 59 inch. I mowed about 6 inches off the ground on my first pass, and the 3 blades were freshly sharpened. It cut small saplings too.
Was not a problem for the mower.
Was not a problem for the mower.
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: Cub brush hog?
That was a close call in the video fur sure it amazing how flat the ground looks and then wamm darn near flips over........... Any way Songs Cub was cutting really nice any one know what type mower Song has and is it a brush or finish mower? I have done brush cutting with the LoBoy and Woods 59 and its a struggle on the Cub I am blaming that on the Woods 59 since its a finish mower and not a brush hog, so may be I would like something other than the Woods 59.
Thanks for all the replies
Thanks for all the replies
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Cub brush hog?
It looks like a Woods 42. Like John said either that, a C-2 will work well, with a Mott flail just behind that. The Woods or C-2 is what would generically be called a brush hog and they can cut pretty much anything you can get under them (including granite ). A Woods 59 is 'finish' mower, really intended for lawns and it is quite a bit wider so they take a much larger cut.
This is the new blade for a C-2:
All 3 come in fast hitch versions too... Cecil just picked up a nice one:
This is the new blade for a C-2:
All 3 come in fast hitch versions too... Cecil just picked up a nice one:
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: Cub brush hog?
Nice pics , somebody got their monies worth from the old blade can blame them Ive done simalar too....... I think a mid mount C-2 is what I need or want, just curious how good a rear mount fast hitch handles the uneven terrain seems to me with a down force lift as in no float it would be difficult...
Who is online
Users browsing this forum: No registered users and 2 guests