This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Wheel lines
- Brent
- 10+ Years
- Posts: 1055
- Joined: Thu Feb 06, 2003 9:21 am
- Zip Code: 93510
- Location: Acton Ca.
Wheel lines
I have a friend who irrigates with wheel lines. Problem is, if you turn on the main line valve all the way when first starting up, it blows the well pump circuit breaker. If you open the valve slowly it works fine. Any ideas?
Always try the easiest thing first.
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Wheel lines
First thought, breaker is undersized for the irrigation pump's electric motor.
Could be a number of problems. Line voltage not up to standard. On 220/440 volt, could also be that one electrical wire supplying electricity to the pump is not equal to the other one/two.
Amp probe to each wire supplying voltage to the pump's motor. Record each wire's amperage during motor start up and then running. Also check each wire's voltage.
Try the following: motor's rated horsepower times 750 watts = ??? watts. ??? watts divided by line voltage = amperage.
Example: 10 HP times 750 = 7500 watts. 7500 watts divided by 220 = 34.09 amps. In this example the amperage would top out at close to 34 or 35 amps on motor start up.
Could be a number of problems. Line voltage not up to standard. On 220/440 volt, could also be that one electrical wire supplying electricity to the pump is not equal to the other one/two.
Amp probe to each wire supplying voltage to the pump's motor. Record each wire's amperage during motor start up and then running. Also check each wire's voltage.
Try the following: motor's rated horsepower times 750 watts = ??? watts. ??? watts divided by line voltage = amperage.
Example: 10 HP times 750 = 7500 watts. 7500 watts divided by 220 = 34.09 amps. In this example the amperage would top out at close to 34 or 35 amps on motor start up.
I have an excuse. CRS.
- Brent
- 10+ Years
- Posts: 1055
- Joined: Thu Feb 06, 2003 9:21 am
- Zip Code: 93510
- Location: Acton Ca.
Re: Wheel lines
Eugene,
What the two of us know about electricity you could put in a thimble. Think it might be 440. Neighbor decided to call an electrician, which I think might be a good idea.
What the two of us know about electricity you could put in a thimble. Think it might be 440. Neighbor decided to call an electrician, which I think might be a good idea.
Always try the easiest thing first.
- daddydip
- 10+ Years
- Posts: 1811
- Joined: Thu Sep 25, 2008 9:57 am
- Zip Code: 19320
- eBay ID: 2001fltri
- Tractors Owned: CC108
1948 farmall f cub
1955 farmall f cub
1955 international lo boy
1952 vai case
2005 236B Caterpillar
1999 TDI Jetta MK IV I like!
2008 H.D FLTRI - Location: Pa. southeast
- Contact:
Re: Wheel lines
open the valve slowly
One Life , One Love , A Love Supreme
The only thing new is untold history, Harry Truman
The only thing new is untold history, Harry Truman
Return to “Farm Life and Better Half Forum”
Who is online
Users browsing this forum: No registered users and 16 guests