This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Lowboy Tailpipe
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 137
- Joined: Fri Jul 02, 2004 7:12 pm
- Zip Code: 49032
- Location: Centreville, MI. 49032
Lowboy Tailpipe
I've been looking for a new tailpipe for a 1957 International Cub Lowboy. I haven't had much luck yet. Are these available from a Manufacturer or can most muffler shops bend one of these up?
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Tom, I believe they are still available.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Ralph
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
As BigDpg said they are still available from case but take your heart medicine before you ask for one they are about $80.
I checked with several muffler shops and they don't have the 1 1/4 pipe
neither do they have the dies to bend the small pipe.
I checked with several muffler shops and they don't have the 1 1/4 pipe
neither do they have the dies to bend the small pipe.
Shoot low Sherriff they are Riding Shadows
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
-
- 10+ Years
- Posts: 137
- Joined: Fri Jul 02, 2004 7:12 pm
- Zip Code: 49032
- Location: Centreville, MI. 49032
Lowboy Tailpipe
Thanks for the lead, I'll check out the Case International dealer. It looks like part number 362 360 R2 is the one, if all the underslung exhausts pipes are the same. The only other option is to braze up the vacuum wand off my Wife's Electrolux. Probably not restoration quality, but I would have the only Cub with a beater bar attachment. However, a short piece will make a nice chrome tailpipe tip. Thanks again. By the way I plowed the snow last week and my Cub did a great job, even without mounting the chains yet.
-
- 10+ Years
- Posts: 568
- Joined: Wed Feb 05, 2003 11:15 pm
- Location: Brooklyn, Swissconsin
- Contact:
Would the beater bar be the vacuum attachment for a flail or sickle mower?
Mike
Mike
30 + tractors including 2 French Super Cubs, French Cubs, 1963 Industrial Cub, 1955 Cub Highcrop etc...German and French built IH tractors and some bigger IH tractors. Of course I have about 20 IH trucks and an IH refridge in the Shop.
Who is online
Users browsing this forum: Crimson Tim, Ole90633 and 22 guests