Here is the process for timing a mag.
1. Remove #1 spark plug. (front plug on engine)
2. Place finger over spark plug hole.
3. Turn engine until pointer is in line with notch on flywheel and compression is felt. If flywheel has 2 notches align pointer with second notch
4. Check mag coupler for proper alignment.
5. Install magneto and move against engine block.
6. Turn engine 2 revolutions until it lines up with the pointer once again.
7. Slowly rotate magneto away from engine block until a distinct click is heard.
8. Tighten magneto. Engine is in time.
How To Time A Magneto
Moderator: Team Cub
-
- Team Cub Mentor
- Posts: 3950
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 12184
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
How To Time A Magneto
Last edited by Cecil on Sun May 17, 2009 7:00 pm, edited 1 time in total.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1
- 419
-
by John *.?-!.* cub owner
Fri Feb 19, 2016 9:25 pm
-
- 8
- 508
-
by Rick Spivey
Fri Mar 18, 2016 4:48 am
-
- 21
- 878
-
by ParlowMillFarm
Fri Oct 28, 2016 5:07 pm
-
- 2
- 582
-
by Jim Becker
Wed Oct 28, 2015 7:32 pm
-
- 1
- 192
-
by Rick Spivey
Wed Jun 24, 2015 7:31 pm
Return to “Ignition/Electrical”
Who is online
Users browsing this forum: No registered users and 0 guests