I am having problems with my h. When its first started It runs a little rough but not too bad. Then as it warms up it starts to miss and pop out of the exhaust.
At full throttle the miss is still there but is a little but harder to hear. once warm at idle it misses, pops, and lopes. You can pull the choke out and you can get it to run fairly smooth. It seems to me to be running lean but I am no expert.
I have been working on this for a few days and I am pretty well stumped.
Now for a little backgound, I have had this tractor for about a year and it has always had a very slight miss. I bought it from a guy who said he could never get it to run right so he parked it. I think this miss is what he was talking about.
Two days ago I thought I would change the short piece of pipe coming out of the manifold with a longer one. So with a lot of heat, pounding, and a big pipe wrench I got it out. Now sense I put the new pipe and muffler that miss has gotten a lot worse.
Sense then I have cleaned the carb 3 times, checked the points 2 times, cleaned the cap and rotor, and checked the timing. I even rigged up another small tank that I know is clean.
One other thing, I can unscrew the main jet ( the one on the bottom of the carb) until it almost falls out. But it still does not seem to get to the point of running to rich. unless I use the choke
I am not sure if working on the manifold with the heat and everything may have opened up a crack or hole causing it to run lean. Or if the carb is the problem,maybe spark it has a mag on it, or possibly something else I have not thought of.
So if anyone has an idea let me know. Because I am not sure what to do next.
Thanks for any help
Zack
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall h missing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: farmall h missing
Run compression test - looking for uneven cylinder compression.
Conduct a vacuum check. This will help isolate the problem area(s).
Mag. Weak or faulty ignition system. Someone didn't reassemble correctly.
Bad spark plug wires.
Just throwing out thoughts.
Conduct a vacuum check. This will help isolate the problem area(s).
Mag. Weak or faulty ignition system. Someone didn't reassemble correctly.
Bad spark plug wires.
Just throwing out thoughts.
I have an excuse. CRS.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: farmall h missing
Possibly a sticking valve. Eugene's suggested diagnostics should tell the story.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
Re: farmall h missing
I forgot to let you know I checked the compression and I got
1=107
2=110
3=110
4=110
I thought that wasn't too bad
Is there an easy way to tell if the mag is weak or there issome thing wrong with it, this is my first experience with a mag.
Could you give me a quick run down on how to do a vacum test and what to look for?
Thanks for the help so far
1=107
2=110
3=110
4=110
I thought that wasn't too bad
Is there an easy way to tell if the mag is weak or there issome thing wrong with it, this is my first experience with a mag.
Could you give me a quick run down on how to do a vacum test and what to look for?
Thanks for the help so far
-
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Re: farmall h missing
You might check the carb. float for a crack. Mine had a very small crack and it caused the fuel level to be off and caused what seemed to sound like a miss.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: farmall h missing
If you suspect an intake manifold leak use an unlit propane torch and move it around the manifold at all junctions and mating surfaces. If it smooths out you've found your leak.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
Re: farmall h missing
I put a new float in the carb about two months ago.
I will have to try the propane torch trick tomorrow and see what happens
I will have to try the propane torch trick tomorrow and see what happens
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: farmall h missing
Since your problem is worse after the engine warms up - run your propane test on a warm engine. You might also consider re-running your compression test after the engine is warm.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
Re: farmall h missing
I will recheck the compression when it is warmed up.
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: farmall h missing
http://www.performanceprobe.com/index2. ... s/imvt.php
Search vacuum testing automobile - lots of hits telling you hwo to do it and what each reading means.
Search vacuum testing automobile - lots of hits telling you hwo to do it and what each reading means.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
Re: farmall h missing
Thanks for all the help everyone. The problem was a bad intake gasket, I put a new one in last night and it seemed to run great.
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 0 guests