This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New member from Mo.
-
- 10+ Years
- Posts: 2
- Joined: Mon Oct 12, 2009 5:32 am
- Zip Code: 64402
- Tractors Owned: Cub
VAC Case
Super H
M Farmall
450 Farmall
460 Farmall
1206
1466
New member from Mo.
I would like to introduce myself to the forum. I'm from NW Mo. and farm and collect red iron. Just bought a Cub Saturday and saw this site and I know I'll have several questions. If you all get tired of me asking so many questions just tell me. I'll start of by asking the age of the cub I bought. I think it is a 1950 but will have you guys double check no# 118186. Hope to chat with you all.
Larry M
Larry M
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: New member from Mo.
Welcome Larry. Glad to have you with us.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
- John(videodoc)
- 10+ Years
- Posts: 6547
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
- Contact:
Re: New member from Mo.
Welcome aboard Larry. Here is where you can check your tractor for the year. Thanks to TM tractor.
John
http://www.tmtractor.com/id/id_001.htm
John
http://www.tmtractor.com/id/id_001.htm
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: New member from Mo.
Hey Larry, welcome to the forum from another Missourian. I live about 70 miles south of St. Louis, and am as much a hillbilly as they get. Are you by chance a member of the Mo chapter of IHCC (International Harvester Collectors Club)? There are a number of members in your area. For a lot of info on cubs go to
http://www.antique-tractor.com/CubFAQ/cub_faq.html and
http://www.atis.net/CubFAQ/cub_faq_2.html
as for as questions, just ask away, we will have lots of answers, some of them may even be right.
http://www.antique-tractor.com/CubFAQ/cub_faq.html and
http://www.atis.net/CubFAQ/cub_faq_2.html
as for as questions, just ask away, we will have lots of answers, some of them may even be right.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Mike in Louisiana
- 10+ Years
- Posts: 7831
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: New member from Mo.
Hello Larry,
Welcome to the forum. Everyone here loves questions and pictures.
Welcome to the forum. Everyone here loves questions and pictures.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: New member from Mo.
The short answer to your question is yes, your tractor was built in November 1950.
Near the top of this page is a line with a bunch of links. One of them is "Manuals". If you click on it, you get the top page of Rudi's site, which has a lot more than manuals. About 1/3 down the page is:
Click on "Production information" and the next page contains
Click on one of the "Cub Production SpreadSheets" and you will get a large table of production details.
Look the table over and you will find a lot of good data. Trent will be looking for data from your tractor to add to the table.
Near the top of this page is a line with a bunch of links. One of them is "Manuals". If you click on it, you get the top page of Rudi's site, which has a lot more than manuals. About 1/3 down the page is:
IH and OEM Manufacturing Information
Cub Production Information
Click on "Production information" and the next page contains
Trent's Farmall Cub Database
Cub Production SpreadSheets - Excel Format
Cub Production SpreadSheets - PDF Format
IH Cub Lo-Boy Production SpreadSheets - PDF Format
Click on one of the "Cub Production SpreadSheets" and you will get a large table of production details.
Look the table over and you will find a lot of good data. Trent will be looking for data from your tractor to add to the table.
- Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: New member from Mo.
Larry, welcome to the forum! It looks as though Jim answered your first quetion and has you pointed in the right direction. Enjoy the forum and don't be afraid to ask any question you may have.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 327
- Joined: Mon Dec 08, 2008 8:28 pm
- Zip Code: 65018
- Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case - Circle of Safety: Y
- Location: MO California
- Contact:
Re: New member from Mo.
Larry I also welcome you. I was born and raised just to the east of you in Harrison County. Left in 86. Was just up there this last weekend. Now in middle of the state.
Ron in Mid Missouri
Ron in Mid Missouri
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: New member from Mo.
Larry:
First welcome and congratulations on acquiring your first Farmall Cub. Bet you can't stop at just 1 They are pretty addictive. To add to what Jim already said, might I suggest that you read the text below. It will give you a brief introduction to the resources that are available here on Farmallcub.com. It is quite unlike any other old iron site on the net.
We enjoy questions, so fire away
First welcome and congratulations on acquiring your first Farmall Cub. Bet you can't stop at just 1 They are pretty addictive. To add to what Jim already said, might I suggest that you read the text below. It will give you a brief introduction to the resources that are available here on Farmallcub.com. It is quite unlike any other old iron site on the net.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
We enjoy questions, so fire away
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
Re: New member from Mo.
Welcome Larry!! I know you'll like your Cub and this forum. Jim is correct, I would very much like to have information from your tractor as I collect from every Cub I can. For now, get settled in and you'll probably see me post a request or 2 for the Cub info in the main forum. PM or email me anytime if you have questions about the database.
Trent McPeak
- dgrapes59
- 10+ Years
- Posts: 3736
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
Re: New member from Mo.
Larry,
Welcome to the Forum! Congratulations on the Cub, you will find these little things tend to grow on just about anyone! Ask away if you have any questions and I am sure the answers will follow!
Best of luck,
Welcome to the Forum! Congratulations on the Cub, you will find these little things tend to grow on just about anyone! Ask away if you have any questions and I am sure the answers will follow!
Best of luck,
David
-
- 10+ Years
- Posts: 4587
- Joined: Mon Apr 17, 2006 9:17 pm
- Zip Code: 65626
- Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155 - Circle of Safety: Y
- Location: MO, Bakersfield, (South - Central)
Re: New member from Mo.
Welcome, Larry, to a great forum with fantastic people and more info than you can possibly imagine. Enjoy.
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
High atop Hummingbird Hill
In the Missouri Ozarks
-
- 10+ Years
- Posts: 2
- Joined: Mon Oct 12, 2009 5:32 am
- Zip Code: 64402
- Tractors Owned: Cub
VAC Case
Super H
M Farmall
450 Farmall
460 Farmall
1206
1466
Re: New member from Mo.
Thanks for all the welcomes. I keep reading more info on my Cub all the time on here. When I bought the cub the previous owner said it was going to be a project tractor. Had set for awhile and wasn't running. But I have it going now and still have more to do. I really don't want to but to help on the repairs I might be selling the implements that came with the tractor. What would be a ball park figure or asking price on a front blade, 1 bottom plow, cuiltivator and a sickle bar mower? The mower needs some work but the rest seems to be ok. Thanks again.
Larry
Larry
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
Re: New member from Mo.
Larry- You probably want to post your request for approx. values on the main Cub forum. More will see it and you'll get more replies. BTW, be prepared to be asked for pics of the implements. Pics will help determine the values.
Trent McPeak
-
- 10+ Years
Re: New member from Mo.
Red Runner wrote: If you all get tired of me asking so many questions
NEVER...
Welcome to the greatest place to ask questions and a wonderful group of "Cub Buddies"...
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 8 guests