International 340 utility
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 314
- Joined: Thu Aug 16, 2007 11:13 am
- Zip Code: 03445
- Tractors Owned: 41 H, 44 H, 47 Cub,57 Cub Loboy, 76 Cub,
47 BN, 50 SA demo,
50 C demo,
54 SC,59 240U,
Ford, 69 5000, 73 4000,75 2000, 70 4500TLB
73 JD 350B dozer - Circle of Safety: Y
- Location: NH, Sullivan
International 340 utility
Just picked up a 340 utility but I can't find the serial # any where and there are 2 brass plates mounted on the tin work under the steering wheel with technical info listed on them. I did find some #'s stamped into the front bolster on the right side but they are hard to read. It has been painted red & white but has yellow paint underneath. Any thoughts or info would be greatly appreciated. Chuck
-
- Team Cub
- Posts: 13312
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: International 340 utility
The serial plate on a 340U should be on the bell housing. Your extra brass plates strongly indicate former military. They should give the branch and some specifics of that unit.
-
- 10+ Years
- Posts: 314
- Joined: Thu Aug 16, 2007 11:13 am
- Zip Code: 03445
- Tractors Owned: 41 H, 44 H, 47 Cub,57 Cub Loboy, 76 Cub,
47 BN, 50 SA demo,
50 C demo,
54 SC,59 240U,
Ford, 69 5000, 73 4000,75 2000, 70 4500TLB
73 JD 350B dozer - Circle of Safety: Y
- Location: NH, Sullivan
Re: International 340 utility
Thanks Jim, there is no plate on the bellhousing, thats where I thought I would find it, I know the engine has a # but I didn't write it down yet.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 706
-
by SONNY
Thu Nov 12, 2015 10:30 am
-
- 1
- 348
-
by SONNY
Mon Feb 26, 2018 8:48 pm
-
- 2
- 396
-
by Jim Reid
Thu Nov 24, 2016 12:47 pm
-
- 2
- 472
-
by Indy4570
Sun Mar 25, 2018 11:46 pm
-
- 1
- 243
-
by Don McCombs
Wed Dec 13, 2017 5:47 pm
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 2 guests