Farmall 100, 1954 - 1973
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
12 posts • Page 1 of 1
Anyone got a good way to get stuck jets out of a Farmall 100 Zenith carb? Soaked for week in carb cleaner(Gunk),soaked for week in PB Blaster,won't budge. Will heat damage carb? Thanks
Donny I have tried good fitting screw drivers with a wrench on square part of driver ,won't budge. I was trying to help a friend out since I have rebuilt my Cub's carb and my uncle's Cub carb,with no trouble. These are really tight!
Before going the ole heat route,---keep in mind that the carb body is luni!---heat can warp them pretty easy!---My question is---WHY are you taking them out?---there is nothing to be gained by removing them!----just soak them with good strong carb cleaner, poke a wire thru them, then blow them out with 175 psi air blow gun!---works every time and nothing gets brok off! thanks; sonny
OOOOPPPPSSS!!!!---yea! now I see a need for removal!---I dont think easy outs will do the job!---might have to use hand drill and VERY carefully drill part of them out,--then get in there with a sharp pointed pic and clean the threads out---a little heat MIGHT work, but dont overdo it!!! LOL!!!----Put atf/diesel mix around the jets then heat that a bit ---yea it will burn, but it also gets in under the threads ! do this several times and keep trying to turn/wiggle them a little.
sometimes this will loosen them up! thanks; sonny
I was able to remove jets with heat from soldering iron . I heated up jets with tip and sprayed kroil around jet let cool and repeated several times. Then they backed out.Thanks for the help,guys!
That is an interesting idea on how to pin-point heat on something.Nice idea!!!! I should have put more thought into that.Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
It amazing the things people think up to solve a problem....when I heard put heat on it....I could picture it all melted....very great idea...and it's stored in the vault.
12 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests