Carb parts

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Carb parts

Postby vanceboroguy » Mon Nov 23, 2009 1:18 pm

Anyone know where you can buy (plugs)for carb.By plugs, I mean the brass caps you drive into round holes in carb body to seal hole . The kit my friend got from NAPA had 2 caps, but one of the holes in carb is smaller than caps supplied with kit. One seals the end of throttle plate shaft and the smaller one seals hole on bottom of air intake just behind choke assembly. Is the plug in air intake side of carb that covers small hole inside air intake at bottom needed for proper funtion of zenith carb for Farmall 100.Also, what is proper name for this part? I am trying to help rebuild for a friend.I only have experience with my IH Cub's carb. Thanks
User avatar
vanceboroguy
5+ Years
5+ Years
 
Posts: 238
Joined: Mon Jan 14, 2008 8:07 am
Location: N.C.,Vanceboro
Zip Code: 28586
Tractors Owned: 51 F CUb

Re: Carb parts

Postby Eugene » Tue Nov 24, 2009 3:35 pm

I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12529
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: Carb parts

Postby vanceboroguy » Tue Nov 24, 2009 4:20 pm

I found a small engine Welch plug at Napa to fit hole on carb.I had used these plugs in small engine carb rebuild kits but didn't know proper name for them.Clerk said some people call them core plugs.
User avatar
vanceboroguy
5+ Years
5+ Years
 
Posts: 238
Joined: Mon Jan 14, 2008 8:07 am
Location: N.C.,Vanceboro
Zip Code: 28586
Tractors Owned: 51 F CUb


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest