I just picked this up to move stuff around the shop . It has an Onan engine in it and runs on propane. I haven't been to successful in finding any information on it.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Namco fork lift
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Steve Butram
- Cub Pro
- Posts: 2459
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
Namco fork lift
Be prepared to be unprepared Seth Goden
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Namco fork lift
Probably Schaeff company. http://www.ritchiewiki.com/wiki/index.p ... ff#History
If you can find the model and serial number, you could probably come up with more information.
Seperate information should be available on the Onan engine and hydraulic components - once identified.
If you can find the model and serial number, you could probably come up with more information.
Seperate information should be available on the Onan engine and hydraulic components - once identified.
I have an excuse. CRS.
- Steve Butram
- Cub Pro
- Posts: 2459
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
Re: Namco fork lift
Thanks Eugene I'm surprised that there is no web site out there that deals with these. I'm spoiled by this site
It is a LC 2015 Serial # 7211906
It will need some new tires in the future but it will be fine fore the winter I plan on repainting it sometime. And depending on what the starter costs to repair I may think about re-powering it with another engine
It is a LC 2015 Serial # 7211906
It will need some new tires in the future but it will be fine fore the winter I plan on repainting it sometime. And depending on what the starter costs to repair I may think about re-powering it with another engine
Be prepared to be unprepared Seth Goden
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Namco fork lift
http://www.schaeffinc.com/selectdealer.asp
A list of Schaeff dealerships.
Couple of suggestions. E-mail the Schaeff corporation and ask their engineering/archive/historical department it they have any information on your lift.
Contact the Schaeff dealership in your area, asking for same information.
Starter for Onan engine. Onan parts are still available - expensive. The starter should/will be still available. It will take some research. Typically the starter was used by several engine manufacturers. Look for the same starter but used on say a Briggs engine - will be cheaper.
Other lift parts will/should be available - after identification.
A list of Schaeff dealerships.
Couple of suggestions. E-mail the Schaeff corporation and ask their engineering/archive/historical department it they have any information on your lift.
Contact the Schaeff dealership in your area, asking for same information.
Starter for Onan engine. Onan parts are still available - expensive. The starter should/will be still available. It will take some research. Typically the starter was used by several engine manufacturers. Look for the same starter but used on say a Briggs engine - will be cheaper.
Other lift parts will/should be available - after identification.
I have an excuse. CRS.
- Steve Butram
- Cub Pro
- Posts: 2459
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
Re: Namco fork lift
Thanks again Eugene Looks like I have a local dealer
Be prepared to be unprepared Seth Goden
-
- 10+ Years
- Posts: 258
- Joined: Tue Apr 21, 2009 4:58 pm
- Zip Code: 23061
- eBay ID: Jgclark3
- Tractors Owned: -
49 cub
48 cub
52 super A
04 JD 345
43 JD B
79 cub - Location: Gloucester, Virginia
Re: Namco fork lift
I work for a Hyster dealer but we can get just about anything under Nacco group and have a huge aftermarket availability for lift trucks, PM me if you need a qoute or anything I'll see what I can do to help if anything is needed.. Josh
Wisdom comes with age, I just haven't reached that age yet.......LOL
-
- 10+ Years
- Posts: 556
- Joined: Sun Jan 04, 2009 5:41 pm
- Zip Code: 49265
- Tractors Owned: 1938 John Deere A
(owned 38 years)
1953 Cub
(owned 21 Years)
1963 Olds Cutlass
1970 Ford F-350
(Cub Hauler) - Location: MI Onsted
Re: Namco fork lift
Steve
Great find and one handy piece of equipment.
Good Luck
Mark
Great find and one handy piece of equipment.
Good Luck
Mark
Experiance is knowing what NOT to do the next time.......
1937 John Deere A (Big John)
1953 Farmall Cub (LiL Red)
Lots of projects.
1937 John Deere A (Big John)
1953 Farmall Cub (LiL Red)
Lots of projects.
- cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: Namco fork lift
Cool Steve
I have a electric Joe. But I have to push it around and it only lifts a 1000lbs about 60". That forklift looks really handy
Billy
I have a electric Joe. But I have to push it around and it only lifts a 1000lbs about 60". That forklift looks really handy
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
- junkman1946
- 10+ Years
- Posts: 761
- Joined: Thu Oct 19, 2006 2:31 pm
- Location: Cape Cod Ma.
Re: Namco fork lift
That motor looks like a CCK or CCK A Onan. Very common 25 30 yrs. ago. Available in everything from Garden Tractors to RV generators. Starters were very durable. A common problem was the wire becoming disconnected on the pos. stud. inside the starter. A little difficult to get at but definately repairable.
1948 Cub F,1962 Original,1971 C.C.model86, WheelHorse and C.C. mini pulling tractors, C.C. models1450 , 682,106,123, Ariens GT17 with loader,Jacobsen Powermax loader and backhoe 8 more Cub Cadets in the shed waiting to go under the knife and spray gun.
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 6 guests