Your gonna hate me for postin this!!!!-----There is not a REAL good place to get the kit,--BUT my local IH dealer had them in stock!
OK,---here is the painful part!-----A complete NEW unit is $1,600.---A used unit from e-bay was around $600 or so and the disk kit from IH was $260. last spring, and really dont have all the parts that might be needed!--I need the outer bell that all the goodies go into, (not included in kit)
These are made by T B Woods INC. and are C-4 series,--size 30. www.TBWOODS.com
Ph. 888-TBWOODS,---Chambersburg, Pa.(that is their headquarters here in the USA)
This clutch can be used as either wet or dry applications.
Kit contains; pressure plates, seperator springs, (the wavy washers), shims,and snap ring!
If other parts are needed they say to buy the $1,600 unit, as the re-building is no longer pratical!