Seems like I should know this but I don't. It is supposed to be in the mid 30's the rest of the week and I would like fit my rings to the cyl bore and torque the rods and head on.
My question is will the temp through off my torque wernch calibration? I thought I heard somewhere the temp when torquing should be about 70 deg.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Torque wrench vs temp
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Torque wrench vs temp
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
- Carm
- 10+ Years
- Posts: 1085
- Joined: Thu Aug 28, 2003 2:11 pm
- Zip Code: 21234
- Tractors Owned: 1947 FCub 1948 FCub (FrankenCub), 1949 C, 1952 SA, 1963 IH 3414 Backhoe Diesel, 1960 Oliver 880 Diesel, 1945 Mack EF Fire Truck
- Circle of Safety: Y
- Location: MD, Baltimore and Freeland
- Contact:
-
- 10+ Years
Never heard that one. I'm sure somewhere where its super critical temp may be a factor but I can tell you in all my years as an A/C tech I've never been taught or told anything about that. Even at GE school in cinncy they never mentioned it. So what I'm saying, if the world's aircraft engines do not care, I can't believe in tractor world it would matter.
- Carm
- 10+ Years
- Posts: 1085
- Joined: Thu Aug 28, 2003 2:11 pm
- Zip Code: 21234
- Tractors Owned: 1947 FCub 1948 FCub (FrankenCub), 1949 C, 1952 SA, 1963 IH 3414 Backhoe Diesel, 1960 Oliver 880 Diesel, 1945 Mack EF Fire Truck
- Circle of Safety: Y
- Location: MD, Baltimore and Freeland
- Contact:
- cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Thanks guys
I've always belived in do it right the first time. I missed a whole month and a half mowing because I needed to change the head gasket. Ant
d so the head was off better lap the valves. I'm this far better check the rings and put in new bearings etc. etc.
I've always belived in do it right the first time. I missed a whole month and a half mowing because I needed to change the head gasket. Ant
d so the head was off better lap the valves. I'm this far better check the rings and put in new bearings etc. etc.
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
- Carm
- 10+ Years
- Posts: 1085
- Joined: Thu Aug 28, 2003 2:11 pm
- Zip Code: 21234
- Tractors Owned: 1947 FCub 1948 FCub (FrankenCub), 1949 C, 1952 SA, 1963 IH 3414 Backhoe Diesel, 1960 Oliver 880 Diesel, 1945 Mack EF Fire Truck
- Circle of Safety: Y
- Location: MD, Baltimore and Freeland
- Contact:
-
- 10+ Years
- Posts: 50
- Joined: Tue Dec 14, 2004 6:28 pm
-
- 10+ Years
- Carm
- 10+ Years
- Posts: 1085
- Joined: Thu Aug 28, 2003 2:11 pm
- Zip Code: 21234
- Tractors Owned: 1947 FCub 1948 FCub (FrankenCub), 1949 C, 1952 SA, 1963 IH 3414 Backhoe Diesel, 1960 Oliver 880 Diesel, 1945 Mack EF Fire Truck
- Circle of Safety: Y
- Location: MD, Baltimore and Freeland
- Contact:
Who is online
Users browsing this forum: tst and 51 guests