Does anyone know where I can have a new serial number plate made for my IH Cub? I've hard of a couple of companies doing it but have not been able to find them.
Thanks for any help.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Serial # Tag - '72 IH Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 10
- Joined: Mon Jan 03, 2005 8:52 pm
- Location: Orlando, Florida
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Check this link for discussions on this topic. It looks like either OEM Tractor Parts or Bob Diener will be your best bet.
http://www.farmallcub.com/phpBB2/viewtopic.php?t=3354&highlight=bob+diener
http://www.farmallcub.com/phpBB2/viewtopic.php?t=3354&highlight=bob+diener
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
OEM makes them BUT from the few that have bought them that have posted here they were not happy with the quality for the price. Somebody else posted of an ex-I-H employee that is suposed to make the best ones but I dont remember his name or contact info.
OOps!!, I see Bigdog posted while I was typing and supplied the name Bob Diener of which I could not remember.
Bigdog does that to me all the time, He waits till I start typing and then posts My thoughts
OOps!!, I see Bigdog posted while I was typing and supplied the name Bob Diener of which I could not remember.
Bigdog does that to me all the time, He waits till I start typing and then posts My thoughts
Last edited by johnbron on Mon Jan 31, 2005 1:21 pm, edited 1 time in total.
Then came Bronson
- Ken (48 Cub)
- 10+ Years
- Posts: 994
- Joined: Mon Feb 03, 2003 11:10 am
- Zip Code: 40023
- Tractors Owned: 1948 FCub
1957 LoBoy - Circle of Safety: Y
- Location: KY, Fisherville
I had this one made for my 1948 at OEM Tractor. Others on this board have not been as satisfied though. http://www.oemtractorparts.com. They have both old and new styles available. As you can see the bottom left rivit hole had to be adjusted a little but I'm happy.
Ken, Annie the '48.
I think we gotter if'n she don't jump, Andy Griffith.
I think we gotter if'n she don't jump, Andy Griffith.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
johnbron wrote:Bigdog does that to me all the time, He waits till I start typing and then posts My thoughts
J.B. - That's because I'm psychotic!.............or is that psychic?????
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Lurker Carl
- Cub Pro
- Posts: 3970
- Joined: Mon Feb 03, 2003 9:54 am
- Zip Code: 16685
- Circle of Safety: Y
- Location: PA, Todd
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
I am one of those who was not happy with the OEM plates. holes were out of alignment, rivets the wrong size, and charged $8 shipping and handling for an item that came in an envelope with 70 cents postage. When I aske about the hole aalignment and rivet problems they said those were standard and my casting must be odd. Yeah right.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 83
- Joined: Sat Nov 22, 2003 8:29 am
- Location: Iowa
Who is online
Users browsing this forum: DonMountain, staninlowerAL and 48 guests