How hard would it be to fabricate this, stock IH, drawbar for one that will bolt up to a Super A?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
drawbar fabrication
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
Re: drawbar fabrication
Pics of the of the 274 drawbar that you can view in several sizes
http://www.smugmug.com/gallery/10984879_nuoP3
http://www.smugmug.com/gallery/10984879_nuoP3
-
- Team Cub Guide
- Posts: 3280
- Joined: Thu Feb 20, 2003 4:54 pm
- Zip Code: 71203
- Tractors Owned: 1948,55, and 56 Farmall Cubs.
- Circle of Safety: Y
- Location: Louisiana
Re: drawbar fabrication
Terry, shouldn't be too hard, but you'd need a machine shop with a big press for those bends....looks like half inch stock.
- SONNY
- 10+ Years
- Posts: 4113
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: drawbar fabrication
Do a "stack-N-lap" and no machine bending involved, just weld the stacks together !(make sure holes and plates line up before welding) ---Been there done that! thanks; sonny
-
- 10+ Years
- Posts: 133
- Joined: Sun Apr 23, 2006 7:13 pm
- Zip Code: 70427
- Tractors Owned: 5-Standard Cubs
1-Cub Lowboy (1958)
1-Cub High Crop
1- AV
1-140 High Clearance
2-HV's
2-MV's
1-Super MTAV (1954)
3-M's
3-Super C's
1-130 - Location: Bogalusa, La.
Re: drawbar fabrication
Terry, You and Christine need to ride over my way and we can probably fix you up with an original IH Super A drawbar. I will be back home on February 3rd.
-
- 10+ Years
- Posts: 258
- Joined: Tue Apr 21, 2009 4:58 pm
- Zip Code: 23061
- eBay ID: Jgclark3
- Tractors Owned: -
49 cub
48 cub
52 super A
04 JD 345
43 JD B
79 cub - Location: Gloucester, Virginia
Re: drawbar fabrication
SONNY wrote:Do a "stack-N-lap" and no machine bending involved, just weld the stacks together !(make sure holes and plates line up before welding) ---Been there done that!
I agree, must easier
Wisdom comes with age, I just haven't reached that age yet.......LOL
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 6 guests