drawbar fabrication

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
How hard would it be to fabricate this, stock IH, drawbar for one that will bolt up to a Super A?


767910350_wdCCf-L.jpg
 
Terry, shouldn't be too hard, but you'd need a machine shop with a big press for those bends....looks like half inch stock.
 
Do a "stack-N-lap" and no machine bending involved, just weld the stacks together !(make sure holes and plates line up before welding) ---Been there done that! thanks; sonny
 
Terry, You and Christine need to ride over my way and we can probably fix you up with an original IH Super A drawbar. I will be back home on February 3rd.
 
SONNY":2e49fmy3 said:
Do a "stack-N-lap" and no machine bending involved, just weld the stacks together !(make sure holes and plates line up before welding) ---Been there done that!
Click to expand...

I agree, must easier
 
You must log in or register to reply here.
Back
Top