This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
3 pt to cub fast hitch adapter??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1475
- Joined: Sat Sep 12, 2009 1:36 pm
- Zip Code: 01516
- Tractors Owned: 48 Cub w/ IH C2 mower
50 High wide "demo" cub with dual fertilizer hoppers
51 high wide cub w/474 planter
62 High wide cub w/ fast hitch
72 High wide w/cultivators
75 Red Long stripe w/fast hitch & C2 mower
76 Red long stripe w/IH 1000 loader & duals
77 long stripe with IH C2 belly mower
55 Super AV w/cultivators
56 Super AV
57 130 High crop w/cultivators
1 IH 574 w IH 2250
quick hitch loader - Circle of Safety: Y
- Location: Douglas, MA
3 pt to cub fast hitch adapter??
Is there such an animal?? Just picked up a 3 pt transplanter
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: 3 pt to cub fast hitch adapter??
There are a couple of prototypes around. As far as I know they have not gone into production yet.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 4113
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: 3 pt to cub fast hitch adapter??
Make one!----not hard to do just takes some time and ya gotta get your hands dirty doing it! lol!
I dont think it would be very stable.---might add some extra iron.
I ditched some of the fast hitch and made a REAL 3-point out of mine by adding brackets!---You dont need to remove all of the fast hitch, just the middle part that drags on the ground,--then tie the goofy bar in front up out of the way.---then add bottom arms and clamp top link adapter onto the rockshaft! works like a champ! I then got rid of the goofy bar all together and went to 3-pt only,(beats the heck out of that pita "fast hitch") ! thanks; sonny
I dont think it would be very stable.---might add some extra iron.
I ditched some of the fast hitch and made a REAL 3-point out of mine by adding brackets!---You dont need to remove all of the fast hitch, just the middle part that drags on the ground,--then tie the goofy bar in front up out of the way.---then add bottom arms and clamp top link adapter onto the rockshaft! works like a champ! I then got rid of the goofy bar all together and went to 3-pt only,(beats the heck out of that pita "fast hitch") ! thanks; sonny
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: 3 pt to cub fast hitch adapter??
Tractordad, here's a pic of one borrowed from an old post borrowed from Ralph's famous "FLAMEY", to give you some ideas when you make one
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: 3 pt to cub fast hitch adapter??
Just make sure when you make one, to install plenty of different adjustment options. As with most things made today, it's hard to buy anything the same, a different engineer for every brand means different heights/widths/etc. They all have a better idea
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 1475
- Joined: Sat Sep 12, 2009 1:36 pm
- Zip Code: 01516
- Tractors Owned: 48 Cub w/ IH C2 mower
50 High wide "demo" cub with dual fertilizer hoppers
51 high wide cub w/474 planter
62 High wide cub w/ fast hitch
72 High wide w/cultivators
75 Red Long stripe w/fast hitch & C2 mower
76 Red long stripe w/IH 1000 loader & duals
77 long stripe with IH C2 belly mower
55 Super AV w/cultivators
56 Super AV
57 130 High crop w/cultivators
1 IH 574 w IH 2250
quick hitch loader - Circle of Safety: Y
- Location: Douglas, MA
Re: 3 pt to cub fast hitch adapter??
Rick Prentice wrote:Tractordad, here's a pic of one borrowed from an old post borrowed from Ralph's famous "FLAMEY", to give you some ideas when you make one
Rick
That is slick!!
-
- 10+ Years
- Posts: 3736
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
Re: 3 pt to cub fast hitch adapter??
tractordad wrote:Rick Prentice wrote:Tractordad, here's a pic of one borrowed from an old post borrowed from Ralph's famous "FLAMEY", to give you some ideas when you make one
Rick
That is slick!!
The hitch ain't too bad either....
David
-
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
Re: 3 pt to cub fast hitch adapter??
Here are a couple pics of my 3ph fast hitch to single point fast hitch. I used a slightly different approach then Rick but we both accomplish the same thing. I had this as Cecils two years ago. I used a fast hitch tool bar. Someone cut it up and put spring tooths on it. So I took and cut all of that off and saved the point and made my conversion out of it. (don't worry Gary B it wasn't pretty as a has been toolbar so I made it into one that could be used for just about everything else that I needed.) The good thing about using 1 1/4" square stock is that you can use the same attachments that you would use on your 144 cults. Depending on the wedge you might have to add a little bead of weld.
When I first built this I set up the spacing so that I can use dad's 7' scraper blade and 6' rock rake. But I can only use this on the Cub with the hydraulic cylinder lift not TC as that won't do it. So now all I do is back up and raise the tool bar and the pins snap in without getting off of the tractor. Once that is on I get off and pin in the third pin and off I go. Pretty slick.
When I first built this I set up the spacing so that I can use dad's 7' scraper blade and 6' rock rake. But I can only use this on the Cub with the hydraulic cylinder lift not TC as that won't do it. So now all I do is back up and raise the tool bar and the pins snap in without getting off of the tractor. Once that is on I get off and pin in the third pin and off I go. Pretty slick.
Dave
-
- 10+ Years
- Posts: 1475
- Joined: Sat Sep 12, 2009 1:36 pm
- Zip Code: 01516
- Tractors Owned: 48 Cub w/ IH C2 mower
50 High wide "demo" cub with dual fertilizer hoppers
51 high wide cub w/474 planter
62 High wide cub w/ fast hitch
72 High wide w/cultivators
75 Red Long stripe w/fast hitch & C2 mower
76 Red long stripe w/IH 1000 loader & duals
77 long stripe with IH C2 belly mower
55 Super AV w/cultivators
56 Super AV
57 130 High crop w/cultivators
1 IH 574 w IH 2250
quick hitch loader - Circle of Safety: Y
- Location: Douglas, MA
Re: 3 pt to cub fast hitch adapter??
dirt devil wrote:Here are a couple pics of my 3ph fast hitch to single point fast hitch. I used a slightly different approach then Rick but we both accomplish the same thing. I had this as Cecils two years ago. I used a fast hitch tool bar. Someone cut it up and put spring tooths on it. So I took and cut all of that off and saved the point and made my conversion out of it. (don't worry Gary B it wasn't pretty as a has been toolbar so I made it into one that could be used for just about everything else that I needed.) The good thing about using 1 1/4" square stock is that you can use the same attachments that you would use on your 144 cults. Depending on the wedge you might have to add a little bead of weld.
When I first built this I set up the spacing so that I can use dad's 7' scraper blade and 6' rock rake. But I can only use this on the Cub with the hydraulic cylinder lift not TC as that won't do it. So now all I do is back up and raise the tool bar and the pins snap in without getting off of the tractor. Once that is on I get off and pin in the third pin and off I go. Pretty slick.
wow!! very nice!! want to make another one?
-
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
Re: 3 pt to cub fast hitch adapter??
Unfortunately at this time I don't have the time to make anything I really miss making stuff for my Cub.
Dave
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: 3 pt to cub fast hitch adapter??
I'm not making anymore at this time either. In case you're wondering why all the holes and the extra brkts on the lower holders on the FLAMEY version. It'll work on both Fcub and lo-boy. Just flip the brkts and adjust accordingly.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13
- 1364
-
by SamsFarm
Mon Jun 28, 2021 12:37 am
-
- 3
- 253
-
by Scotty777
Mon Aug 09, 2021 3:49 pm
-
- 5
- 155
-
by Glen
Fri Aug 04, 2023 4:55 pm
-
- 2
- 165
-
by Glen
Tue Mar 05, 2024 6:15 pm
-
- 5
- 333
-
by SONNY
Tue Jun 08, 2021 9:31 am
Who is online
Users browsing this forum: Majestic-12 [Bot] and 9 guests