Disk Hillers

Farming and rural life discussion forum. Cooking, hunting, gardening, fishing, critters, etc.

Moderator: Team Cub

Disk Hillers

Postby wfmdfm » Sun Mar 28, 2010 7:41 am

I am looking to pick up a set of hillers. They offer 12, 14, and 16" disks and also various shafts. What size would work out best for general gardening? Seems like the shortest shaft would be best under the Cub but not sure od the dick size.
Wally
Image
wfmdfm
Cub Star!!
Cub Star!!
 
Posts: 398
Joined: Tue Jun 23, 2009 6:59 pm
Location: Middleboro Massachusetts
Zip Code: 02346
Tractors Owned: .
1947 Circle Cub #1110
1947 Circle Cub #1316
1948 Cub #43915
1966 Power King
189 two way Plow
54A Blade
144 Cultivator
26 ft Welcraft
1967 Case 530ck Backhoe

Re: Disk Hillers

Postby DanR » Mon Mar 29, 2010 6:30 am

I'm not sure the size of the discs matter much. Be careful of the shaft under the oil pan.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
DanR
501 Club
501 Club
 
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Location: Tennessee East
Zip Code: 37743
Circle of Safety Award
Circle of Safety: Y

Re: Disk Hillers

Postby danovercash » Mon Mar 29, 2010 6:51 am

Put them on a rear tool bar.
"It is impossible for a man to learn what he thinks he already knows." -Epictetus

252646 & 221525. 195897 (Gone but not forgotten!)
http://groups.yahoo.com/group/dansfarmallcub/
danovercash
501 Club
501 Club
 
Posts: 2823
Joined: Mon Feb 17, 2003 8:48 pm
Location: NC, Kannapolis
Zip Code: 28081
Circle of Safety Award
Circle of Safety: Y

Re: Disk Hillers

Postby ScottyD'sdad » Mon Mar 29, 2010 7:18 am

I have a set from Agri-Supply. Not sure of the diameter. I cut the shaft to length. I prefer the front mount, because my stiff, old carcass,doesn't look over its shoulder, as well as it used to. They are imported, but I don't anticipate wearing them out, with my one hour per year, use. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
ScottyD'sdad
Cub Pro
Cub Pro
 
Posts: 4980
Joined: Thu Aug 31, 2006 7:00 pm
Location: Ma. Rehoboth
Zip Code: 02769
Circle of Safety Award
Circle of Safety: Y

Re: Disk Hillers

Postby DirtDoc » Sat Apr 03, 2010 11:52 am

The set I have will fit in the shank lock for the cultivator. I believe the disc is 16". The bigger the disc the deeper the furrow or the higher the hill you can make. I like to toss a little dirt up around corn while I cultivate. It covers up small weeds around the plants. I have one cultivator shank next to the row and then the hiller disc tosses that dirt up around the plants. So the discs are over 1' apart. No danger of hitting the oil pan. Good Luck...Greg
DirtDoc
Cub Star
Cub Star
 
Posts: 167
Joined: Sun Aug 31, 2003 9:54 pm
Location: Napoleon,In
Zip Code: 47037
Tractors Owned: JD 4020,Jd 850, 48 cub, 49cub, 2 sets cultivator,plows,woods mower,174 planter, sidedressing unit, sickle mower, cc 106

Re: Disk Hillers

Postby SONNY » Sat Apr 03, 2010 1:49 pm

Also the bigger diameter would push/roll easier too!---if you have the room for them to fit under there. thanks; sonny
SONNY
501 Club
501 Club
 
Posts: 2159
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: Disk Hillers

Postby TJG » Fri Apr 16, 2010 7:24 pm

DirtDoc...do you cultivate with a shank near the row, and another shank in front of the rear tire, and then a hiller in between the two shanks? Do you have a picture?

Todd
TJG
501 Club
501 Club
 
Posts: 1214
Joined: Wed Jul 02, 2008 6:11 am
Location: MN, Mankato

Re: Disk Hillers

Postby DirtDoc » Fri Apr 16, 2010 10:12 pm

TJG--Yes, that is exactly the way I do it. No pics at this time. I only learned how to post this past winter. :oops: But it throws plenty of soil around the plant and no risk of hitting the engine. I'll get some pics this year of the set up. I have sweet corn planted so it won't be long..Greg
DirtDoc
Cub Star
Cub Star
 
Posts: 167
Joined: Sun Aug 31, 2003 9:54 pm
Location: Napoleon,In
Zip Code: 47037
Tractors Owned: JD 4020,Jd 850, 48 cub, 49cub, 2 sets cultivator,plows,woods mower,174 planter, sidedressing unit, sickle mower, cc 106

Re: Disk Hillers

Postby fisherman jon » Tue Apr 20, 2010 1:56 am

TJG wrote:DirtDoc...do you cultivate with a shank near the row, and another shank in front of the rear tire, and then a hiller in between the two shanks? Do you have a picture?

Todd


here's a couple i saved off the net somewhere...


Image

Image
1957 Cub "Joyce"
Image
fisherman jon
Cub Star
Cub Star
 
Posts: 89
Joined: Sun Nov 29, 2009 9:33 pm
Location: Supply, NC
Zip Code: 28462
Tractors Owned: 57' Cub "Joyce"
08' 2605 MasseyFerguson

Re: Disk Hillers

Postby Jim Becker » Tue Apr 20, 2010 9:55 am

I don't think you will find a single right answer on how to set up the hillers. It is a little like buying a shovel then asking how deep you should dig. You need to decide what you want to accomplish then adjust things to do it. If you are working with relatively small plants and you want to just throw a little dirt into the row, hillers in the second position can work well. It also makes a relatively broad hill that places soil for later hilling up. If you want something more extreme, the front position will do the job. Operating speed will make a big difference in the results too. If you just want to do a little hilling, setting the shovels just so may do it without hillers.

For reference, here is the relevant page from the manual with a couple illustrations:
Image
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11853
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Disk Hillers

Postby TJG » Thu Apr 22, 2010 9:19 pm

thanks fisherman jon. what does the chain drive on your tractor? It is a very sharp looking tractor.

Todd
TJG
501 Club
501 Club
 
Posts: 1214
Joined: Wed Jul 02, 2008 6:11 am
Location: MN, Mankato

Re: Disk Hillers

Postby fisherman jon » Fri Apr 23, 2010 12:02 am

TJG wrote:thanks fisherman jon. what does the chain drive on your tractor? It is a very sharp looking tractor.

Todd



thats not mine, just a couple pics I saved. the chain drive is for a feritilizer unit.
1957 Cub "Joyce"
Image
fisherman jon
Cub Star
Cub Star
 
Posts: 89
Joined: Sun Nov 29, 2009 9:33 pm
Location: Supply, NC
Zip Code: 28462
Tractors Owned: 57' Cub "Joyce"
08' 2605 MasseyFerguson


Return to Farm Life and Better Half Forum

Who is online

Users browsing this forum: No registered users and 1 guest