This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
mounting C-3 mower on A Farmall
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
mounting C-3 mower on A Farmall
I took a C-3 mower off of a Cub and want to mount it on an A farmall, and I need some help I would like some pictures of the mule drive for an A to C-3 I think I can cut and re-weld the Cub one to make it work on an A, any help would be appreciated.
Jim Turner
-
bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: mounting C-3 mower on A Farmall
Art C did it.
-
artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
Re: mounting C-3 mower on A Farmall
the pulley is a 9". i used part of a cub right angle mule drive ( the pulley setup) i had on hand. it cuts very well at 1/2 to 2/3 throttle and doesn't care how high or thick the grass is.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: mounting C-3 mower on A Farmall
Thank you very much artc that should help me out a bunch, one question is that a free run pulley on the tractor?
Jim Turner
-
artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
Re: mounting C-3 mower on A Farmall
it's a woods pulley i picked up at a John Deere dealer. they are 3 piece affairs that will interface with the 1 1/8 spline. it does not have an overrunning clutch. if i remember correctly, you are looking for 2200+ RPM's at the mower. perhaps someone will chime in with a little more definitive info.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
Tractorbandit
- Posts: 1
- Joined: Wed Mar 08, 2023 1:40 am
- Zip Code: 35111
Re: mounting C-3 mower on A Farmall
artc wrote:
the pulley is a 9". i used part of a cub right angle mule drive ( the pulley setup) i had on hand. it cuts very well at 1/2 to 2/3 throttle and doesn't care how high or thick the grass is.
I know this is a old post but do you have any more pictures and info on how you made the mule drive for your Farmall A?
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 11 guests
