All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
11 posts • Page 1 of 1
IH supplied a number of different engine components to other equipment manufacturer's who built things like road graders. I can't tell for sure, but that may be a Gallion nametag on the side rail of the road grader.
I saw one exactly like that a little while back. thought it was homemade, but looked nice. Now I guess maybe it was factory? Cool !
"What doesn't kill you makes you stronger." - Friedrich Nietzsche
'49 Cub.....(Mr. Cub)
Last one of those I saw was mounted to a M .
1979 International Cub (Artie),193 plow,22 sickle mower,144 cultivator,54a blade,59" belly mower,wheel weights
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
It's kind of off topic, but that photo looks like it was taken at the Gilmore Classic Car Museum in Michigan.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
We saw one of these at the Leesburg show we attended. Not the best pics in the world, due to the lighting, but here it is:
In the middle of every difficulty lies opportunity. - Albert Einstein
Deep South CubFest
February 13 & 14, 2015
I had one of those for awhile when i was doing excavating contracting. Mine was built by Road Patrol but dont remember where they were located. Mine didnt have the nice fenders like that one and had a Farmall rust patena paint job but worked good for light grader work and road maintance. It didnt have leanable wheels and took 40 acres+ a football field to turn it around in. It still had the factory belly hyd pump but it was unused> The grader was operated by a aux pump n tank mounted out on the front. It didnt have a pto shaft just a block off plate over the hole. And it was manual control on rotating the blade. You learned real quick how to lower on corner of blade trip the latch and power adjust the blade by driving forward or back lol cause you didnt get off and swing it by hand.
And Scrivet swears it would run 35 or 40 mph on the highway, being towed on a chain behind a Dodge picup that is.
Cool I want one
I am planing on stretching my 100 two feet and putting a grader blade on it.
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
The man I bought my "M" from had a second "M" that had a Gallion grader on it and Shepard diesel under the hood, industrial yellow in color. I couldn't buy 'em both so the Gallion had to sit, it was a big heavy son-of-a-gun. I've got a picture of it somewhere. It was complete, kinda rough and the engine was stuck. Unfortunately it ended up doing for scrap...
Member IHCC Chapter 37 & 42 - North Carolina
11 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest