What Have You Done Now - she said - Missouri

[GWrider1957]

Well I did it, just brought home a 1949 cub and the little women thinks I'm nut's. Always wanted one and found it for a song, fold a 500 dollar bill in half and go from there. All I can say is it seems to run fine. Had to roll it off a hill to get her going. Generator not working, hit the starter and nothing happens, but fired up off the hill. Loaded it on the trailor and headed home. Got home and noticed two large pools of a milky white fluid under each rear wheel. Looks like some sort of seal replacements are needed. Don't know a thing about these, but I have a book, a hammer, and duct tape - the rest, I'll be asking questions from you all. Middle Missouri native and looking forward to hearing from others.

[Bill E Bob]

Sounds like you got a good deal. The milky fluid is from the transmission. They are bad about collecting water and forcing the gear oil past the seals. Best to drain the transmission, add about 2 qts kerosene or diesel fuel and drive it around for 5-10 min., drain the diesel/kerosene and add 3 1/2 PINTS of 80-90W gear oil, then watch for leaks.
If no leaks you're good to go, if leaks, THEN worry about seals. As for gear oil, it has been said the GL 4 is preferred over the GL 5 as the GL 5 doesn't get along with yellow metal and the Cub transmission has some bronze bushings in it.

PS Welcome to the Forum

[johnny j]

Welcome to the forum

[John(videodoc)]

Welcome aboard! Why cant i find them kind of deals?

[Rick Prentice]

Welcome. As Bill mentioned about the oil, here's a picture from TM's site showing the 3 areas. You'll drain from number 1, fill up till oil runs out of number 2, and if the trans gets water in it from running down the shifter lever, it fills up and out number 3 where the side seals are at for the finals.

click to enlarge

Rick

[John *.?-!.* cub owner]

Welcome to the forum, and the statement (What have you done now) sure does sound familiar. Wonder if our wives are related. I am about a hundred miles east of you, and we also have some other members in the same general distance, VinceD, Eugene, come to mind, there are others that do not come to mind at present. One of our young members (Scotty) is presently stationed at Fort Leonard Wood for some heavy equipment training, and would probably be glad for a chance to spend some time looking at something besides uniforms and bulldozers. If you go to the announcements section and look at the Cubfest schedule (first item at tip of page) you will see one for Kansas, which is probably the closest to you if you want to attend one for a good learning session though you may be overwhelmed by the amount of friendliness and helpfulness you will find there. There also is a show (Cubarama) at Fredericktown the last full weekend of September every year. It is mainly a show (rather than a cubfest), for cubs, but any IH product is welcome.

[Ike]

GWrider1957,

Here is the link to the Kansas Cubfest that John mentioned. It is this Saturday, May 1. You are welcome to come!
http://www.farmallcub.com/phpBB2/viewtopic.php?f=8&t=50231

Ike

[Charles (49) Mo]

Great bunch of guys and gals are here to help you.

[Rudi]

First - congrats on the acquisition of your very 1st cub ... It may not be longer before another one makes an appearance

Don't know a thing about these, but I have a book, a hammer, and duct tape - the rest, I'll be asking questions from you all. Middle Missouri native and looking forward to hearing from others.

You will probably find much of what is contained in the links below helpful..

to the Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.

A fair amount of reading, but there is just so much info available.. enjoy the read

[FCub S. E. Tn]

Welcome to the forum. A lot of friendly people and lots of info and help is always available, just ask.

[Mike in Louisiana]

Welcome, Take some tome and thumb through the information, There is plenty of it.

[dgrapes59]

Welcome to the forum!

My wife said about the same thing... then she found me my second one!

It sounds like you got a great deal on it, hopefully it's needs will be small as well!

Best of luck

[VinceD]

Welcome to the forum. We live south-west of West Plains. Always glad to help.