This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New "to me" 3 point hitch for the SA
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
New "to me" 3 point hitch for the SA
Picked up a set today for $50 bucks at our state show today.
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: New "to me" 3 point hitch for the SA
Man, you cleaned the kettle on that one!
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: New "to me" 3 point hitch for the SA
Can someone with a 3pt for the SA post some close up pictures, especially how the top link connects to the tractor? I want to get one but I've busted the budget on rebuilding the tractor and may need to make one myself to make up for money spent. I haven't started it yet, still waiting on my carburetor, the original Carter was beyond repair from water sitting in the bowl for last 20 years. I think the motor and head are good, compression measured 105, 110, 115, 105. But now I think my touch control is bad since I can lift on the rear bar and the touch control piston moves freely quite a bit.
Gerry
Gerry
-
- 10+ Years
Re: New "to me" 3 point hitch for the SA
Here is the one I have and I bought another one just like it for 50.00
I don't have the diagonal bar installed to keep they sway out but I do have it. The bar goes on the bolt at the final the arm is on and across to the end of the other arm where the attachment is. It's a slide flat bar with 2 bolts you tighten down to keep the slippage down.
http://www.smugmug.com/gallery/11309658_T2wYS#793812194_ZYbrt
I don't have the diagonal bar installed to keep they sway out but I do have it. The bar goes on the bolt at the final the arm is on and across to the end of the other arm where the attachment is. It's a slide flat bar with 2 bolts you tighten down to keep the slippage down.
http://www.smugmug.com/gallery/11309658_T2wYS#793812194_ZYbrt
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: New "to me" 3 point hitch for the SA
Good pictures, thanks
Gerry
Gerry
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: New "to me" 3 point hitch for the SA
Here's my progress on making a 3 pt. for my SA, so far it's cost about $230 buying the parts from Tractor Supply. I made the final drive attaching plates from 9/16" steel and added the chains for side to side sway. The only thing left to do is make the bracket to mount the top link. A lot cheaper than the kits for $500 plus shipping but not as good as the one for $50.
Gerry
Gerry
-
- 10+ Years
Re: New "to me" 3 point hitch for the SA
Now that excites me. I'm anxious to see it work.
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: New "to me" 3 point hitch for the SA
I finished the 3pt. today and bought a lift boom from Tractor Supply. Works great, this is going to save me a lot of lifting.
Gerry
Gerry
-
- 10+ Years
Re: New "to me" 3 point hitch for the SA
I like that a lot. It has longer arms than either set that I have.
Great job man!
Great job man!
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: New "to me" 3 point hitch for the SA
SA 3 pt. that I put on my tractor. I made the final drive brackets and the bracket for the lift bar, the rest I got at Tractor supply.
Gerry
Gerry
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: New "to me" 3 point hitch for the SA
yep, pulls good and picks up. I was worried about the hydraulics on this old tractor, but looks like it doesn't need a rebuild.
Gerry
Gerry
-
- 10+ Years
Re: New "to me" 3 point hitch for the SA
that's great work man. i am really impressed but you putting all that together.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Point Gap For Super A With Distributor
by ricky racer » Sun Dec 31, 2023 4:15 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 746
-
by AL Farmall Boy
Mon Jan 08, 2024 10:33 pm
-
-
-
One point lift height Attachment(s)
by Saucymynx » Tue Jan 11, 2022 10:12 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 33
- 1292
-
by SONNY
Sat Jan 15, 2022 5:42 pm
-
-
-
Fast Hitch from a 130 to a SA
by CDKL » Fri Jun 24, 2022 5:59 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 3
- 182
-
by SamsFarm
Fri Jun 24, 2022 10:26 pm
-
-
-
3pt hitch options Attachment(s)
by jdeere86 » Tue Mar 19, 2024 5:01 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 122
-
by jdeere86
Wed Mar 20, 2024 5:08 pm
-
-
-
Front receiver hitch
by Lt.Mike » Sun Jun 20, 2021 12:47 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 417
-
by Lt.Mike
Sun Jun 20, 2021 6:34 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest